If you need a workhorse of an onboard air system that can tackle any job you throw at it, look no further than the Horn Air 244K Onboard Air System. Not only is the Horn Air 244K great for train horns, but this constant duty system also packs enough power to meet and exceed many pneumatic needs. Our Nightmare edition comes with a stealth black finish on the Viair 444 compressor to give the system a clean and low profile look.
Included is our matching Black 2-gallon Tank that has four 1⁄4 in ports and two 1⁄2 in ports. Strategic placement of the ports allows you to be able to install your drain cock on the bottom-most port on the tank for optimal draining no matter how the air tank is oriented. The ½ inch ports provide optimal airflow, preventing bottlenecking that occurs in other kits.
The stealth black Viair 444C that comes with our Horn Air 244K is a constant duty compressor that was built to handle a heavy workload. With a 100% duty cycle at 100 PSI and a recharge time from 110-150 PSI of just less than a minute, the Horn Air 244K makes sure you always have the air that you need. The 444C is part of a new generation of compressors that feature a brand new, patent-pending, intercooler head design that helps disperse heat much more efficiently.
An Increasing number of people are using this for more than just blasting horns! With a system like the Horn Air 244K, you can also use the air supply to:
While the Horn Air 244K is a complete onboard air system that provides you with everything you need to get up and going, be sure to add on a Wireless Remote, Tire Inflation Kit, or an Electric Drain Valve kit to get the most out of one of the best onboard kits you can buy!
Our HornAir systems come complete with all necessary fittings, including a Viair 110/150 Pressure Switch with a built-in relay, safety blow-off, air gauge, and drain cock. Unlike many other onboard air systems, ours comes with 10 and 18 gauge wire, as well as a complete wiring kit including a fuse holder. This takes out the guesswork and helps ensure your system is installed correctly. All of our kits are also backed by a one year manufacturer's defect warranty as well as lifetime tech support!
Please Note: This HornAir system is not recommended for AirChime horns. We recommend using at least a 4-gallon tank with larger scale train horns like the P3, P5, K3, and K5; however, this kit is perfect for HornBlasters Shocker horns, Outlaw, and Bandit series horns.
* Supply Voltage: 13.8 Volts
|2.0 GALLON TANK||FILL RATE|
|0 to 150 PSI||3 min. 45 sec. (± 10 sec.)|
|110 to 150 PSI||1 min. 15 sec. (± 05 sec.)|
* Supply Voltage: 13.8 Volts
Use this product in a safe and responsible manner, at a distance of at least 100 feet from others.
Proper Hearing protection must be worn when using this air horn. Hearing loss or permanent damage may result from unsafe use.
Never operate this product in a closed environment or close to pedestrians or others.
It is the consumer's responsibility to comply with local noise ordinances and D.O.T. sound level laws.
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.