This is Matt's 1996 Ford Bronco and it features our Conductor's Special 544K train horn kit. Installed in the rear underneath the vehicle, you will find our Shocker XL train horns that are featured in this kit. Then installed in the cargo area is the HornAir 544K onboard air system. This onboard air system includes a 5-gallon air tank and the HornBlasters 1NM air compressor. The 5-gallon tank in this kit provides the horns with roughly 8-10 seconds of honk time. And the fast fill air compressor can recover the tank in about 1 minute and 40 seconds!

WORDS FROM THE OWNER

My name is Matt. I live in Southern, New Jersey and I installed the HornBlasters Conductor's Special 544K train horn kit on my 96 Ford Bronco Eddie Bauer. The installation went very smoothly, and was completed in about 6 hours(first time installing). If you want attention, your going to get it! This kit has been the best investment I have made for my truck by far. From the Ordering process, to the 24 hour tech support. To the product quality, to the final installation. Overall it was the best experience with a company I ever had over the phone. If you want outstanding service and products worth the money, HornBlasters is the way to go!

UP TO 1500% LOUDER

UNLIMITED HONKING

ZERO
DELAY

CAPABLE ONBOARD AIR SYSTEM


HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit

PRODUCT

PRICE

Sold out
HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit
Sold out

SPECIFICATIONS

Horn Shocker XL train horn
Horn Kit Part Number HK-S4-544K
Operating Pressure 150 PSI
Restart Pressure 110 PSI
Voltage 12-Volt DC
Horn Material High-impact fiberglass reinforced ABS
Horn Measurements № 1 19.50″ (495.30 mm)
№ 2 16.25″ (412.75 mm)
№ 3 14.75″ (374.65 mm)
№ 4 12.75″ (323.85 mm)
Horn Flare 5″ (127 mm)
Air Tank HornAir 5-gallon 8 port air tank
Tank Length 20.5″ (520.7 mm)
Tank Diameter 9.5″ (241.3 mm)
Tank Height 11.5″ (292.1 mm) (With Legs)
Tank Weight 20 lb (9.07 Kg)
Tank Ports x7 1/2" NPT, x1 3/4" NPT
Air Flow 1.75 CFM
Max Amperage 25 amps
Maximum Duty Cycle 100% @ 100 PSI
Compressor length 10.75″ (273.05 mm)
Compressor width 4″ (101.6 mm)
Compressor height 6.75″ (171.45 mm)
Compressor Weight 11 lb (4.99 Kg)

Who’s ready to take their setup to the next level like Matt? Click the button below to submit your install photos to our media submission form!