TANKS A LOT
Double your air and double your fun by picking up one of our lowest-cost dual-tank spare tire delete kits, the Conductor's Special 232 Dual Tank Spare Tire Delete kit! This kit features our iconic Shocker XL train horns that have been waking the dead for over 20 years. With 4 trumpets tuned to sound just like an actual locomotive, you'll be speaking train in no time.
Just because the Conductors Special 232 is budget-friendly, doesn't mean it sacrifices performance. Our weather-resistant air system in this kit features dual 2-gallon air tanks and a HornBlasters 3Q air compressor, giving you a complete system that is capable of providing a 6-10 second honk time and refilling in less than 2 minutes!
- Locomotive Sound: The four trumpets of the Shocker XL horn, crafted from fiberglass-reinforced ABS, guarantee an authentic train horn experience.
- Simplified Installation: The dual tank spare tire delete bracket replaces the spare tire, and eliminates the guesswork, significantly reducing installation time from 6-8 hours down to 3-4 hours.
- Built to Endure: The entire kit is weather-resistant, ensuring longevity. Plus, the bracket's two-coat powder finish ensures it stands up against the toughest conditions.
- Complete Package: From essential installation components to lifetime support, we've got you covered every step of the way.
Important Notes:
- **VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.**
- FITS MOST FULL-SIZE PICK-UPS
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- **Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.**
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete dual tank bracket
- 2-gallon 6 port air tanks
- hornblasters 3q air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16" D.O.T. approved air line
- 17 ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2" NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
- Part Number: HK-S4-232-STDDK
- Operating Pressure: 150 PSI
- Restart Pressure: 110 PSI
- Voltage: 12-Volt DC
- Horn: Shocker 4 Train Horn Kit
- Material: High-impact fiberglass reinforced ABS
- Horn Measurements
-
№ 1 19.50″ (495.30 mm)
№ 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) - Tank: HornAir 2-gallon 6 port air tank
- Compressor: HornBlasters 3Q air compressor
- Max amperage: 20 Amps
- Maximum duty cycle: 100% @ 100 PSI
- Flow Rate @ 0 PSI: 1.41 CFM
- Assembled Length: 21"
- Assembled Width: 23"
- Assembled Height: 15"
- Assembled Weight: 40 lbs
| 12-VOLT COMPRESSOR | |
|---|---|
| 2.0 GALLON TANK | FILL RATE |
| 0 to 150 PSI | 2 min. 52 sec. (± 10 sec.) |
| 110 to 150 PSI | 56 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL train horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer's defect warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
Warnings & Notices
Hearing Protection Required
This product produces extreme loudness. Proper hearing protection must be worn at all times during its operation. Hearing loss or permanent damage may result from unsafe use. Use this product in a safe and responsible manner and at a distance of at least 100 meters from others. Never operate this product in a closed environment, in close proximity to living beings, or where prohibited by law.
Warning
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.