Understanding PSI: What Air Pressure Really Means
ALL YOU NEED TO KNOW ABOUT AIR PRESSURE & HOW IT AFFECTS YOUR ONBOARD AIR SYSTEM
Air. Nature’s best natural resource. You need it to live, your vehicle needs it to run and your onboard air system is no different. Unlike the air we breathe, the air that your onboard air system needs requires immense pressure in order to work correctly. Regardless if it's for blowing horns, airing up tires, powering air suspension or something else, you need air pressure in order for anything to work.
We use it every day when we drive our vehicles and honk our horns, but just because we depend on it doesn’t always mean you know how it works. This week, we get into the science of what air pressure is, how it works and (more importantly) what it all has to do with your train horn kit or onboard air system .
TALKING NERDY
To understand how air pressure works and how it affects your onboard air, you must first understand what air is. Well, hopefully, you don't need us to tell you what air is, but what does it consist of? Here is a refresher for any of you that slept through 8th-grade science class. Air is actually a collection of gas molecules(oxygen, nitrogen, carbon dioxide, hydrogen, etc.). While air is something that you can’t see or touch, it actually has a weight to it.
As the amount of these molecules in an area increases, millions of collisions occur on the surface area. These collisions are what we call air pressure. Air pressure is a measurement of the number of molecule collisions within a determined surface area. We measure these collisions with a barometer and count them in units of Pounds per Square Inch (PSI).
We can see examples of PSI all throughout nature. In fact, a human’s cardiovascular system has a pressure of 2.5-3 PSI depending on how healthy you are. The Earth has an atmospheric pressure of 14.7 PSI at sea level. Examples of PSI are even more prevalent in man-made objects, such as a football or basketball, your shower, and scuba gear. A ton of our technology utilizes air pressure to make our lives easier.
Pressure may be utilized more in the automotive industry than anywhere else. Several systems in your vehicle depend on the pressure (PSI) being just right in order to work correctly. If your tires don’t have pressure, you’re not going anywhere. If you have a diesel engine, your turbo creates boost, which is air pressure that is forced into the intake. Understanding what pressure each system needs to be is an important part of vehicle maintenance, no matter what you drive. Your onboard air system is no different. Without proper air pressure, your onboard air system becomes inoperable.
GETTING ONBOARD
It's our belief that every vehicle should have an onboard air system , no matter what kind of vehicle you drive. Having a louder and safer horn while having access to air to top off tires or fix a flat is just a good idea no matter who you are. Just like any other system on your vehicle, you need to at least have a rough idea of how it works and how to maintain it in order to get the most out of your onboard air.
The first thing you need to figure out is what you will be using your onboard air for. Are you using it for just the horns? Are you focused on mainly air suspension? Maybe you just need it in case you need to air up a flat. If your horn requires an onboard air system, choose a system that meets the horn’s pressure and airflow requirements. If you also plan to use it for air suspension or tire inflation, account for those requirements when selecting your compressor and air tank. Horns, air suspension and tire inflation may require different pressures. Large tires need more air volume, but tire size alone does not mean you need 200 PSI. Compare the compressor's output at the required pressure, its duty cycle and its published inflation or tank-fill times. For a direct-drive electric horn, use the built-in compressor or the separate compressor specified for that horn; it supplies air on demand without an air tank.
After you have your onboard air kit that works best for what you are going to be using it for, good to get yourself familiar with a few parts that are paramount to producing and maintaining air pressure in your system. There are four main components that you want to be aware of in order to make sure your system is getting the correct pressure you want: The compressor , the pressure switch , safety blow-off , and your air gauge .
COMPRESSION COMPONENTS
In an onboard air system, the compressor draws in outside air and pumps it into the air tank. Sounding the horn uses stored air and lowers the tank pressure. The compressor replenishes that air as needed. If you use air faster than the compressor replaces it, pressure drops and the horn may weaken until the tank recovers. A direct-drive electric horn works differently: its compressor supplies air to the horn while it is activated, without storing air in a tank.
In an onboard air system, the pressure switch controls when the compressor starts and stops. A switch rated 110–145 PSI, for example, starts the compressor at 110 PSI and stops it at 145 PSI. These are tank-pressure settings, not a universal operating pressure for every horn. Changing the switch does not increase the pressure rating of your tank, compressor, valves, air line or fittings. Follow the specifications for the complete system. If your horn requires a lower operating pressure than the onboard air system supplies, use a suitable regulator in the horn’s air supply. These tank-pressure controls do not describe how a direct-drive electric horn operates.
Use the safety blow-off valve specified for your onboard air system. It is a backup pressure-relief device, not the normal way to control tank pressure. Do not select it only because its opening pressure is higher than the pressure switch's cutoff. It must also be appropriate for the tank and system ratings. If it opens during normal operation, shut down the compressor and check the pressure-control system before using it again.
Your air gauge may be the most underrated component on your kit. While it is true that you don't need an air gauge in your system in order for it to work, your air gauge is absolutely an integral part of your onboard air system . The fact is, if you don’t have a way to check your air pressure, how will you know if your system is working correctly? Any troubleshooting with onboard air usually starts with seeing what your air pressure is doing. Without a gauge, you just have no way of knowing what's going on inside that tank!
PRESSURIZED PUNCH
Most HornBlasters electric horns use a direct-drive air compressor, either built into the horn or mounted separately. The compressor supplies air on demand when you activate the horn, so no air tank is needed. Oogah horns are the exception in our lineup: they use an electric motor to produce sound without compressed air.
Air horns and train horns that require an onboard air system receive compressed air from that system. Its compressor replenishes the air stored in the tank as needed. These systems have different pressure and airflow requirements, so use the air supply specified for your horn.
For a direct-drive electric horn, use its built-in compressor or the separate compressor specified for that model. The PsychoBlasters V2, for example, uses a separate direct-drive compressor and does not need an air tank. Do not connect a direct-drive horn to an onboard air system unless the horn manufacturer specifically approves that setup.
For a horn that requires an onboard air system, follow the horn’s published operating-pressure limit. The current Shocker XL specification lists a maximum working pressure of 150 PSI. That is a limit for that horn, not a universal setting for every air horn or train horn. If your tank operates at a higher pressure, the horn's air supply must be regulated to a pressure within its rating. More tank pressure does not automatically mean a louder horn.
We actually tested our Shocker XL Train Horn (our 2nd loudest train horn) at three different pressure levels. We tested them at 100 PSI, 150 PSI and 200 PSI and what we found even surprised us. The Shocker XL Train Horns were loudest at 150 PSI! Having more pressure doesn't always mean more volume for your horn, so keep this in mind when choosing an onboard air system . If you need to run at 200 PSI, your horn may not be as loud as it could be!
Those results apply to the Shocker XL used in that test, not to our direct-drive electric horns. That historical test is not an operating recommendation. Follow the current pressure rating for your horn; the Shocker XL's published maximum working pressure is 150 PSI.
Once you have onboard air on your ride, you won't ever want to be without it again. If you have ever been stranded on the side of the road, you know how handy onboard air can really be. There is a reason why service trucks and emergency vehicles have an onboard air system. You can run powerful air tools off of it, blow up inflatables and even clean out your car with it. Understanding how your system works and how air pressure affects its performance will make sure you are never without air again!
Test Your Air Pressure Knowledge
Check what you’ve learned about PSI, onboard air systems and direct-drive electric horns.
Shop HornBlasters
Explore horn kits, electric horns, install brackets, and onboard air systems built for loud, reliable performance.

