Black Widow Install
2020 Silverado RST
Black Widow.
Nathan K5LA.
Five bells.
Nathan AirChime K5LA 544 Train Horn Kit
This 2020 Silverado RST is a Nathan AirChime K5LA 544 / Black Widow install. The owner has run a Nathan K5LA for over 17 years — first on a 1989 Caprice Classic, then on a 2012 Tahoe Z71, where that set is still installed.
Before HornBlasters sold individual bell mounting brackets, the horns were kept hidden: two behind the grille and three in the rear on the Caprice; two up front and three under the rear on the Tahoe, with the compressor under the hood and the tank in the spare tire location. On the Silverado, there is no space under the hood for the compressor, and the spare tire delete kit does not work with these horns. One option being considered is a fabricated bar across the radiator that bolts into the factory location, with all five horns firing down behind the grille. The Nathan Airchime 5 Bell Remote Mounting Kit is the individual-bell mount for a K5 setup.
- Nathan AirChime K5LA: five-bell railroad horn, 17 years on previous vehicles
- HK-K5-544K Black Widow kit: K5LA, 5-gallon 8-port tank, 1NM compressor
- 5 Bell Remote Mounting Kit: individually placed bells instead of a manifold
- Silverado mounting: no hood space for the compressor
- Spare tire delete: does not work with these horns
- Possible mount: fabricated radiator bar, five horns firing down behind the grille
Get the same setup
Specifications
| Horn | |
| Part number | HK-K5-544K |
| Operating pressure | 150 PSI |
| Restart pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Nathan AirChime K5LA (K5 low mount American tune) |
| Horn material | Cast Aluminum |
| Horn length | 19″ (482.6 mm) |
| Horn width | 29.75″ (755.65 mm) |
| Horn height | 9.25″ (234.95 mm) |
| Horn weight | 37 lb (16.78 Kg) |
| Horn port | ½″ NPT |
| Air tank | |
| Tank | HornAir 5-gallon 8 port air tank |
| Tank length | 20.5″ (520.7 mm) |
| Tank diameter | 9.5″ (241.3 mm) |
| Tank height | 11.5″ (292.1 mm) (With Legs) |
| Tank weight | 20 lb (9.07 Kg) |
| Tank ports | x7 1/2″ NPT, x1 3/4″ NPT |
| Compressor | |
| Max amperage | 26 amps |
| Maximum duty cycle | 33% @ 100 PSI |
| Compressor length | 9.0″ (228.6 mm) |
| Compressor width | 4.0″ (101.6 mm) |
| Compressor height | 7.05″ (179.07) |
| Compressor weight | 8.00 lb (3.63 Kg) |
Got a HornBlasters install worth bragging about? Send us your photos — your ride could be our next featured build.
Media Submission
