Skip to content
Back to Dodge Trucks 
01
02
03
04
05
06
Progress
Featured Install
2-Chime 3-Liter Air Horn Kit
1989 Dodge RAM Charger
Sound Sample
0:00 0:00
2-Chime horn 3-liter air 120 PSI ~5 sec honk Classic truck HK-2CHIME-M3
1989 Dodge RAM Charger Classic truck.
Classic truck.
Compact twin-chime.
Seriously loud.
2-Chime 3-Liter Train Horn Kit
Wyatt F. gave his 1989 Dodge RAM Charger a loud upgrade with the HornBlasters 2-Chime 3-Liter Train Horn Kit. A compact twin-chime horn and 3-liter onboard air system keep the install clean and simple — vintage looks, modern volume.
Whether he’s rolling through town or pulling into a show, this setup brings deep, bold sound without overcomplicating the build. Proof you don’t need a new truck to run a serious horn kit.
- 2-Chime train horn: dual metal trumpets, strong dual-tone blast
- 3-liter air system: AC-M3 compressor and tank combo for tight installs
- ~5 second honk: solid blast time on a full charge
- ~35-second recovery: refill from 90–120 PSI
- Classic truck fit: compact kit that suits vintage RAM Chargers
- Complete kit: horns, air source, valve, airline, wiring, and hardware
Shop the setup
Get the same kit
What’s in the box
Includes
- 2-Chime air horns
- AC-M3 3L air source
- 1/4″ electric valve
- 1/4″ airline
- Wiring kit
- Fuse, switch, relay
- Fittings
- Hardware
- Ear plugs
The kit
Specifications
2-Chime 3-Liter Air Horn Kit Wyatt’s RAM Charger runs the HK-2CHIME-M3 kit: a stealth-black 2-chime horn and the AC-M3 3-liter compressor and tank combo operating at 120 PSI.
120PSI Operating pressure
2chimes Dual-tone air horn
~5sec Continuous honk
3L AC-M3 air source
| Kit | |
| Part number | HK-2CHIME-M3 |
| Operating pressure | 120 PSI |
| Restart pressure | 90 PSI |
| Voltage | 12-Volt DC |
| Max amperage | 18 amps |
| Honk time | ~4–5 seconds |
| Recovery | ~35 seconds (90–120 PSI) |
| Horn | |
| Horn | 2-Chime air horn |
| Horn length | 15.75″ (400.05 mm) |
| Horn width | 7.75″ (196.85 mm) |
| Horn height | 4.25″ (107.95 mm) |
| Horn weight | 11.7 lb (5.31 kg) |
| Air system | |
| Air source kit | AC-M3 3 Liter Compressor and Tank Combo |
| Air source length | 16.535″ (420 mm) |
| Air source width | 4.921″ (125 mm) |
| Air source height | 7.086″ (180 mm) |
| Air source weight | 11.2 lb (5.08 kg) |
| Volume | 3 L |
| Fill rate, at 13.8 volts | |
| 3 L tank · 0 to 120 PSI | ~2 min |
| 3 L tank · 90 to 120 PSI | ~35 sec |
Frequently Asked Questions
Is the 2-Chime 3-Liter kit a complete system?
Yes. The HK-2CHIME-M3 kit includes the 2-Chime air horns, the AC-M3 3-liter compressor and tank combo, a pre-installed 1/4″ electric air valve, airline, wiring, fuse holder, switch, relay, fittings, mounting hardware, and ear plugs.
How long can I honk with the AC-M3 3-liter air system?
About 4–5 seconds of continuous honk on a full tank, with roughly 35 seconds to recover from 90–120 PSI. Operating pressure is 120 PSI with restart at 90 PSI.
Why is this kit a good fit for a classic Dodge RAM Charger?
The twin-chime horn and compact 3-liter air source are built for tighter installs. Wyatt’s 1989 RAM Charger shows you can run a loud, complete onboard system on a vintage truck without a huge tank footprint.
How should I mount the AC-M3 compressor and tank?
Mount the tank/compressor combo upright in an enclosed space away from moisture, dirt, and debris. The tank-mounted compressor is not fully sealed — following that guidance protects performance and warranty. Do not detach the compressor from the tank.
What electrical requirements does the kit need?
It runs on 12-Volt DC with an 18 amp max draw from the AC-M3 air source. Use the supplied fuse holder, relay, and wiring, and confirm your battery and charging system can support the compressor load.
Show off your build
Got a HornBlasters install worth bragging about? Send us your photos — your ride could be our next featured build.
Media Submission