Flatlaw 3 Liter Train Horn Kit
2010 Jeep Wrangler JK
Flatlaw under the Jeep.
Trail-ready volume.
Street-ready presence.
Flatlaw 3 Liter Train Horn Kit
Andy G. upgraded his 2010 Jeep Wrangler JK with the Flatlaw 3 Liter Train Horn Kit — a compact, flat-mount system built for Jeeps that still need ground clearance and cabin space. The Flatlaw sits low under the vehicle and delivers a deep, resonant three-chime blast without crowding the trail gear.
A 3-liter compressor and tank combo keeps the kit self-contained: roughly 7–9 seconds of continuous honk at 120 PSI, fast recovery for street and trail use, and enough onboard air for tire inflation after airing down. Andy’s Wrangler now sounds as bold as it looks — practical for city driving and ready for off-road weekends.
- Flatlaw train horn: three-chime flat-mount design with authentic locomotive tone
- 3-liter air combo: compressor and tank in one compact unit
- 120 PSI system: restarts at 90 PSI for quick recovery
- 7–9 second honk: serious blast time for a small footprint
- Jeep-friendly mount: low-profile underbody fit that preserves clearance
- Trail + street utility: loud horn plus tire-inflation onboard air
Get the same kit
Includes
- Flatlaw Train Horn
- 3-Liter Air Compressor & Tank Combo
- Pressure Switch
- Air Valve
- Hoses & Fittings
- Wiring Kit
- Mounting Hardware
Specifications
| Horn / Kit | |
| Part number | HK-F3B-M3 |
| Horn | Flatlaw train horn |
| Horn length | 17.5″ (444.5 mm) |
| Horn width | 16.25″ (412.75 mm) |
| Horn height | 8″ (203.2 mm) |
| Horn weight | 12.5 lb (5.67 kg) |
| Voltage | 12-Volt DC |
| Honk time | ~7–9 seconds |
| Air system | |
| Air source | 3-Liter compressor & tank combo |
| Operating pressure | 120 PSI |
| Restart pressure | 90 PSI |
| Air source length | 16.535″ (420 mm) |
| Air source width | 4.921″ (125 mm) |
| Air source height | 7.086″ (180 mm) |
Frequently Asked Questions
Is the Flatlaw 3-Liter Train Horn Kit a complete system?
Yes, the Flatlaw 3-Liter Train Horn Kit is a complete system. It includes the Flatlaw train horn, a 3-liter compressor and air tank combo, pressure switch, air valve, hoses and fittings, wiring, and all required mounting hardware. Andy’s 2010 Jeep Wrangler JK installation shows how this compact kit delivers massive sound without sacrificing space.
How long can I honk with the Flatlaw 3-Liter Train Horn Kit?
The Flatlaw 3-Liter Train Horn Kit provides approximately 7–9 seconds of continuous honk time. It operates at 120 PSI and automatically restarts at 90 PSI, offering fast recovery times and impressive volume for both trail and street use.
What makes the Flatlaw 3-Liter flat-mount design ideal for Jeeps?
The flat-mount design allows the system to install cleanly under the vehicle without interfering with ground clearance or other components. Andy’s Wrangler JK demonstrates how this low-profile design keeps the build clean while delivering a powerful, commanding horn blast.
Can the Flatlaw 3-Liter Train Horn Kit be used for tire inflation?
Yes. The onboard air system can be used for tire inflation and light air tool use. This makes the Flatlaw 3-Liter Kit a practical upgrade for off-road vehicles where airing down and back up is common.
Why is the Flatlaw 3-Liter ideal for both on-road and off-road use?
Its compact tank, fast recharge time, and deep, resonant tone make it equally useful on city streets and rugged trails. Andy’s Jeep Wrangler JK proves that the Flatlaw 3-Liter delivers serious volume while maintaining everyday drivability and off-road functionality.
Running HornBlasters on a Wrangler, Gladiator, or Cherokee? Submit your install photos and join the Train Horn Hall of Fame.
Media Submission
