(2018-2020 JEEP JLU 4WD V6)


We are proud of the fact that most of our kits fit any vehicle, but let's be honest, even our most low profile kits can be tricky for a lot of Jeeps. For as long as we have been making horn kits, customers have asked for a bolt-on solution for Jeeps. We have heard you and after years of research and development, we proudly bring you the loudest bolt-on horn kit you can buy, the Wrango JLU Horn Kit!

For our first bolt-on kit, we made sure to pack as much power as we possibly could in our Wrango JLU Kit. With the HornBlasters AC-2 stealth black air compressor, dual Shocker Horns and our 2 Gallon Tank on a dual bracket system, not only is our Wrango kit ridiculously louder than any bolt-on system you have ever heard before, installation is quicker and easier than any of our other kits with only about a 2 hour install time!  

We take the guesswork out of the installation process by providing clear and easy to understand step-by-step instructions and include everything needed from start to finish, right down to the pre-riveted rivet nuts in the legs of the tank. The dual bracket system fits perfectly on to your transfer case and evaporation canister, keeping a low profile and making sure the attention is all on the sound.

While easy installation is great, it doesn’t matter if you are running a wimpy horn. Anyone that already owns a HornBlasters kit knows you never have to worry about that with one of our kits. Rocking our #2 and #4 Shocker XL bells, the Wrango JLU is not for the faint of heart. These fiberglass-reinforced ABS bells might not look like much to the uninitiated, but nothing prepares you for the massive sound that comes from such a compact kit.

Jeep owners, this is the kit you have been waiting for. With customization being such a big part of Jeep culture, this is the premier air horn kit to own. The Wrango JLU kit delivers you the same world-class quality you have come to expect from HornBlasters in a convenient bolt-on solution that doesn't pull any punches.

  • Honk Time = 6-7 Seconds
  • Recovery Time = 50 Seconds
  • Capable onboard air with the ability to use small air tools & air up tires
  • 120 PSI 2-gallon weather-resistant onboard air system

Compatible with 2018-2020 Jeep JLU V6 4WD 4 Door Models. It is not compatible with E-TORQUE & DIESEL models!! Mostly bolt-on, some drilling required, and designed specifically for these models allows the brackets to bolt-up perfectly.

**If you're curious why the kit doesn't work with 2021+ JLU's check out the image below!**



  • Compressor Bracket Length: 10.375" (263.52 mm)
  • Compressor Bracket Width: 7.5" (190.5 mm)
  • Compressor Bracket Height: 4.25" (107.95 mm)
  • Horn Bracket Length: 23.2" (589.28 mm)
  • Horn Bracket Width: 4" (101.6 mm)
  • Horn Bracket Height: 4" (101.6 mm)
  • Volume: 2 gals (7.57 L)
  • Working Pressure: 120 PSI
  • Tank Ports: x4 NPT 1/4" Ports, x2 NPT 1/2" Ports
  • Tank Length: 17″ (431.8 mm)
  • Tank Diameter: 6″ (152.4 mm)
  • Tank Height: 8″ (203.2 mm)
  • Wrango Horn Bell 1: 16.25″ (412.75 mm)
  • Wrango Horn Bell 2: 12.75″ (323.85 mm)



Sold out


The Wrango JKU Horn Kit is by far the Easiest and Quickest Install. With just a few hand tools, general wiring knowledge, and 3 hours of your time you can install this whole kit!


This bracket does fit 2018-2020 Jeep JLU V6 4WD 4 Door Models, with mild lift. Mostly bolt-on, some drilling required, and designed specifically for these models allows the brackets to bolt-up perfectly.


These brackets are made in the U.S. from 12 Gauge Mild Steel! The brackets also come with a Black Powdercoat Finish. So not only are they American Made, But they are Durable too!


Everything in this system is backed with a 1-year manufacturers defect Warranty! And the Shocker Horns that come in the Wrango JLU Horn Kit have a Lifetime Manufacturers Defect Warranty!



Use this product in a safe and responsible manner, at a distance of at least 100 feet from others.

Proper Hearing protection must be worn when using this air horn. Hearing loss or permanent damage may result from unsafe use.

Never operate this product in a closed environment or close to pedestrians or others.

It is the consumer's responsibility to comply with local noise ordinances and D.O.T. sound level laws.


This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


  • Money-Back Guarantee/Refund Policy
    All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the product's current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.
  • Warranty
    Our Shocker XL train horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by a one-year manufacturer's defect warranty.
  • HornBlasters.com Satisfaction Guarantee
    HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.
  • Cross-Shipments
    HornBlasters.com will not cross-ship returned merchandise.
  • Physical Damage Policy
    Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.