The Conductor's Special 232 Train Horn Kit on David's 2008 Dodge Charger exemplifies a seamless fusion of robust sound and sleek design. The Shocker XL train horns, strategically placed behind the bumper, remain hidden, ready to unleash a powerful locomotive tone at a moment's notice. The control system, featuring a flip switch and a red push button within the center console, ensures effortless horn activation whenever desired.
Initiating the installation, David removed the bumper to establish a clear route for the hoses and wires. An existing opening in the engine bay near the firewall served as the conduit for routing the connections through to the trunk, where the HornAir 232 onboard air system was positioned. This thoughtful arrangement highlights the ease of integrating our train horn kit into the Charger's structure, ensuring a commanding horn sound is always within reach for a bold presence on the road.
WORDS FROM THE OWNER
"Heres my 2008 Dodge Charger, with a Conductors special 232 model installed. I installed a flip switch (led light when on) on the left side to control when the red push button (installed in center console) is activated and ready to blow the horns. To any other Dodge Charger installers- the bumper comes off fairly easy with 2 screws and a nut, as well as several nylon screws and plugs. the nylon screws holding the top of the bumper are easy to take out, the nylon plugs holding the wheel well cover to the bumper HAS to be cut off (replacement plugs can be found at any auto or hardware store). All the hoses and wires fit perfectly through this hole in the engine bay on the right side(looking at the engine) right against the firewall there's a spongy almost rubber plug there...take it out bam bamm!!!...just route all the wire and hose through the carpet and sides, through the back seat to the trunk and done!! THANKS HORNBLASTERS!!"
