Conductor's Special 244 Nightmare Edition Train Horn Kit

A train horn kit that can do it all and look good doing it, our Conductor’s Special 244K Nightmare Edition Train Horn Kit has been the go-to train horn kit for years. With enough volume to wake the dead and enough power to handle most light pneumatic jobs you can throw at it, our Conductor’s Special 244K is one of our most well-rounded kits and a solid addition to any vehicle. 

Our HornBlasters Conductor’s Special 244K features our legendary Shocker XL train horns. Hand-tuned to the exact specifications of the US Train Horn Chord and packing just as much power as an authentic train horn, our Shocker XL train horns are the closest you can get to the real deal without having to spend thousands on a retired locomotive train horn. Constructed from an ultra-durable fiberglass-reinforced ABS composite with stainless-steel diaphragm and backed by a lifetime warranty against manufacturer defects, you get a train horn that is not only insanely loud but ridiculously durable as well. 

Of course, for horns of this caliber, you need an onboard air system that will keep up. With enough air to blast our Shocker XL train horns for up to 6 seconds, as well as handles most pneumatic applications such as air tools or tire inflation. Our Nightmare edition is powered by a constant-duty air compressor, that recovers our 2-gallon 6-port air tank in a little over a minute. With hardware and instructions included, you get everything you need to get back out on the road and honking. 

• The loudest horns we manufacture, be heard for miles!
• Stainless steel internals combined with the fiberglass-reinforced ABS construction ensures these horns are extremely durable through all conditions!
• Individually mounted horns for flexible installation
• All-inclusive train horn kit with everything needed for installation
• 150 PSI 2-gallon air system provides 3-5 seconds of honk time
• Capable of filling tires and using small air tools

Please note: The 6 horn upgrade kit does NOT include the extension brackets to connect to our STDK bracket or Shocker XL horn mount.

CUSTOMER VIDEO REVIEW OF THESE HORNS

This video shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!

• Shocker XL train horns
• 2-gallon 6 port air tank
• 1NM black air compressor
• 110/150 PSI pressure switch w/ 40 amp relay
  
• Remote mountable intake filter assembly
• Spare air filter elements
• 10 ft of 5/16" D.O.T. approved air line
• 17 ft of 1/2" D.O.T. approved air line
• 6ft of 3/8" air line (for air compressors air intake)
• 22ft of 10-gauge red wire
  
• 22ft of 18-gauge blue wire
• 22ft of 18-gauge grey wire
• 1/2" NPT Black Widow stainless steel electric air valve
• HornBlasters 200 PSI stainless steel liquid-filled air gauge
• Brass NPT fittings kit including Safety Blow-off
• Complete wiring kit with fuse holder & fuses
  
• Compressor mounting hardware
• Detailed instructions

• Part Number: HK-S4-244K
• Operating Pressure: 150 PSI
• Restart Pressure: 110 PSI
• Voltage: 12-Volt DC
• Horn: Shocker XL train horn
• Horn Material: High-impact fiberglass reinforced ABS
• Horn Measurements

  № 1 19.50″ (495.30 mm)	№ 2 16.25″ (412.75 mm)
  № 3 14.75″ (374.65 mm)	№ 4 12.75″ (323.85 mm)

• Horn Flare: 5″ (127 mm)
• Air Tank: HornAir 2-gallon 6 port air tank
• Tank Length: 17″ (431.8 mm)
• Tank Diameter: 6″ (152.4 mm)
• Tank Height: 8″ (203.2 mm)
• Tank Weight: 10 lb (4.54 Kg)
• Average Fill Time: 50 Sec
• Max amperage: 25 Amps
• Maximum duty cycle: 100% @ 100 PSI / 50% @ 200 PSI
• Flow Rate @ 0 PSI: 1.75 CFM
• Maximum working pressure: 200 PSI
• Compressor length: 10.75″ (273.05 mm)
• Compressor width: 4″ (101.6 mm)
• Compressor height: 6.75″ (171.45 mm)

* Supply Voltage: 13.8 Volts

• HornBlasters Conductor's Special 244 instruction manual
• HornBlasters Conductor's Special 244 air compressor wiring diagram

• Money-Back Guarantee/Refund Policy
  All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.
• Warranty
  Shocker XL train horns are backed by our lifetime Manufacturer's defect warranty. The rest of the components are backed with a 2-year Manufacturer's defect warranty.
  
• HornBlasters.com Satisfaction Guarantee
  HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.
• Cross-Shipments
  HornBlasters.com will not cross-ship returned merchandise.