Conductor's Special 232 Spare Tire Delete® Kit

The Spare Tire Delete bracket bolts directly to your factory spare tire location, reducing installation time from 6–8 hours to 3–4 hours with no fabrication needed. It provides a stealthy, low-profile setup that retains ground clearance while tucking the entire system neatly under the truck. Perfect for lifted Tacomas running oversized tires where the factory spare is rarely used.

Yes, the Conductor's Special 232 Spare Tire Delete is a complete plug-and-play system that includes Shocker XL train horns, a HornAir 2-gallon 6-port tank, a 3Q compressor, Spare Tire Delete bracket, hoses and fittings, wiring, and all mounting hardware. Everything you need ships together for a bolt-on installation with no fabrication required.

The 2-gallon tank typically delivers 3–5 seconds of continuous honking at full blast. After honking, the 3Q compressor automatically refills the tank from 110 to 150 PSI in approximately 1 minute 33 seconds, ensuring quick recovery between honks.

Yes. The 3Q compressor with 100% duty cycle at 100 PSI and 1.41 CFM air flow provides rugged onboard air capability beyond just the horn. The 6-port tank gives you multiple connection points for inflating oversized tires, airing up air suspension, or running small air tools, making this kit incredibly versatile for off-road adventures.

The Conductor's Special 232 operates at a maximum of 150 PSI and automatically restarts the compressor at 110 PSI. This pressure range ensures consistent, powerful train horn performance while protecting system components from over-pressurization.