Discover a world of powerful sound with Rostik's 2008 Nissan Frontier, equipped with our distinctive Conductor's Special 232 Train Horn Kit. This is not your run-of-the-mill installation; Rostik has ingeniously crafted a custom roof mount, providing a high perch for the Shocker XL Train Horns included in the kit. This elevated position allows for clear, forceful sound projection that's hard to miss.

Tucked securely in the truck's bed is the dependable HornAir 232 Onboard Air System, standing ready to fuel the horns with the necessary air pressure. This setup grants around 3-5 seconds of resonant horn time, enough to grab attention on the road. More than just a powerful horn system, this installation carries a practical edge too. Should the need arise, the onboard air system is capable of airing up a tire, adding a layer of utility to its already impressive performance.

UP TO 1500% LOUDER

UNLIMITED HONKING

ZERO
DELAY

CAPABLE ONBOARD AIR SYSTEM


HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit

PRODUCT

PRICE

Sold out
HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit
Sold out

SPECIFICATIONS

Part Number HK-S4-232
Operating Pressure 150 PSI
Restart Pressure 110 PSI
Voltage 12-Volt DC
Horn Shocker XL train horn
Horn Material High-impact fiberglass reinforced ABS
Horn Measurements № 1 19.50″ (495.30 mm)
№ 2 16.25″ (412.75 mm)
№ 3 14.75″ (374.65 mm)
№ 4 12.75″ (323.85 mm)
Horn Flare 5″ (127 mm)
Air Tank HornAir 2-gallon 6 port air tank
Tank Length 17" (431.8 mm)
Tank Diameter 6" (152.4 mm)
Tank Height 8″ (203.2 mm)(With Legs)
Tank Weight 10 lb (4.54 Kg)
Air Compressor HornBlasters 3Q air compressor
Max Tank Size 5-Gallons (18.93 Liters)
Max amperage 20 Amps
Maximum duty cycle 100% @ 100 PSI
Flow Rate @ 0 PSI 1.41 CFM
Compressor length 10.1″ (256.54 mm)
Compressor width 4.5″ (114.3 mm)
Compressor height 7″ (177.8 mm)
Weight 12.1 lb (5.48 Kg)

Who’s ready to take their setup to the next level like Rostik? Click the button below to submit your install photos to our media submission form!