Conductor's Special 244 Nightmare Edition Train Horn Kit

Yes, the Conductor's Special 244K Nightmare Edition Train Horn Kit is a complete train horn system. It includes the Shocker XL train horn with four bells, HornAir 2-gallon 6-port air tank, air compressor with 100% duty cycle at 100 PSI and 50% duty cycle at 200 PSI, pressure switch, air valve, hoses and fittings, wiring, and all mounting hardware needed for installation. Everything you need is included to get your train horn system up and running right out of the box, making it perfect for SEMA-ready builds like Cambered Customs' Jeep Wrangler JK.

The Conductor's Special 244K Nightmare Edition provides 3-5 seconds of continuous honk time with its 2-gallon 6-port air tank. The system operates at 150 PSI maximum working pressure with automatic restart at 110 PSI, and the compressor has a maximum working pressure of 200 PSI. The compressor fills the tank from 0 to 150 PSI in approximately 2 minutes, with recovery from 110 to 150 PSI taking about 35 seconds, ensuring quick readiness for frequent use whether blasting through crowds at shows or hitting the trails.

The Conductor's Special 244K Nightmare Edition includes an air compressor that operates on 12-Volt DC with a maximum amp draw of 25 amps and provides 1.75 CFM flow rate at 0 PSI. The compressor has a 100% duty cycle at 100 PSI and 50% duty cycle at 200 PSI, offering lightning-fast air tank recovery and continuous use without overheating. This heavy-duty compressor isn't just for show, it's capable of running air tools, inflating tires, and powering any pneumatic accessory you need, making it perfect for both sound and functionality.

The Conductor's Special 244K Nightmare Edition includes the Shocker XL train horn, which is one horn with four bells measuring 19.50", 16.25", 14.75", and 12.75" with 5" flares. The horns are constructed from high-impact fiberglass reinforced ABS material and are known for their authentic, deep locomotive tone and unrivaled volume. Perfectly matched with the bold stance of the Wrangler JK, these horns make sure your build is heard before it's seen, delivering maximum volume and authentic train sound.

Yes, the onboard air system in the Conductor's Special 244K Nightmare Edition Train Horn Kit is versatile and can be used for more than just train horns. You can use it to inflate tires, run air tools, or power any pneumatic accessory you need. The 2-gallon tank and heavy-duty compressor with 100% duty cycle at 100 PSI provide reliable compressed air for both horn operation and utility functions, making it a multi-purpose system that maximizes the value of your installation while maintaining that authentic locomotive sound.