AIR COMPRESSORS

Shop 12-volt and 24-volt air compressors from HornBlasters, VIAIR and Oasis for horn systems, air suspension, tire inflation and other pneumatic applications. Compare onboard compressors, portable tire inflators and air source units by voltage, airflow, operating pressure, duty cycle and recommended tank size. If your horn requires an onboard air system, choose a compressor rated for that system's tank size and operating pressure. Direct-drive air horns need a compressor matched to that horn’s pressure and airflow requirements. Starting with a complete horn setup? Browse our complete horn kits.

45 products

X1 Portable Air Compressor

FREE SHIPPING (CONTINENTAL US)
1 review
€39,95

3-Liter Air Source Kit

Light Duty – 110 PSI
3 reviews
€194,95

3-Liter Air Source Kit

3 reviews
€194,95

120 PSI 1.5-Gallon Air Source Kit

(Light Duty - 120 PSI / 2.03 CFM)
5 reviews
€231,95

2-Gallon 150 PSI Sealed Air Source Unit

Medium Duty – Weather Resistant
6 reviews
€296,95

HB-2L Air Compressor

(Light Duty - 150 PSI / 2.03 CFM)
3 reviews
€152,95

HB-2L Air Compressor

3 reviews
€152,95

HB-2 Air Compressor

5 reviews
€185,95

HB-2 Air Compressor

5 reviews
€185,95

HB-3Q Air Compressor

Quiet & Weather Resistant
7 reviews
€246,95

HB-3Q Air Compressor

7 reviews
€246,95

HB-1NM Air Compressor

(Constant Duty - 200 PSI / 1.75 CFM)
7 reviews
€291,95

HB-1NM Air Compressor

7 reviews
€291,95

1HD Industrial Air Compressor

Constant Duty – 150 PSI / 1.80 CFM
€370,95

Oasis XD3000 Military Grade Air Compressor

Heavy Duty – 200 PSI / 15.0 CFM
2 reviews
€2.358,95

Oasis XD4000 Military Grade Air Compressor

Heavy Duty – 200 PSI / 15.0 CFM
4 reviews
€2.450,95

Viair 480C Air Compressor

Constant Duty – 200 PSI / 1.86 CFM
1 review
€321,95

Viair 480C Air Compressor

1 review
€321,95

Viair 450C Air Compressor

Constant Duty – 150 PSI / 1.80 CFM
7 reviews
€259,95

Viair 450C Air Compressor

7 reviews
€259,95

Viair 444C Air Compressor

Constant Duty – 200 PSI / 1.76 CFM
12 reviews
€238,95

Viair 444C Air Compressor

12 reviews
€238,95

Viair 425C Air Compressor

Fast Fill – 175 PSI / 2.40 CFM
1 review
€281,95

Viair 425C Air Compressor

1 review
€281,95

Viair 400C Air Compressor

Fast Fill – 150 PSI / 2.62 CFM
8 reviews
€260,95

Viair 400C Air Compressor

8 reviews
€260,95

Viair 380C Air Compressor

Constant Duty – 200 PSI / 1.58 CFM
5 reviews
€166,95

Viair 380C Air Compressor

5 reviews
€166,95
Sold Out

Viair 350C Silver Air Compressor

Constant Duty – 150 PSI / 1.52 CFM
3 reviews
€296,95

Frequently Asked Questions

What kind of air compressor does a train horn need?

A train horn installed on a vehicle typically needs an onboard air compressor designed to fill an air tank, with a voltage rating that matches the vehicle’s electrical system. The tank supplies the burst of air when you honk, and the compressor refills it between uses.

The compressor also needs to be rated for your tank’s capacity and the pressure your system runs at. If you only honk occasionally, a slower-filling compressor may meet your needs. If you honk more often, compare refill times and duty-cycle ratings at your operating pressure so the compressor can keep up without overheating.

Where you mount the compressor matters, too. A non-sealed compressor needs a dry, protected location. For an exposed installation, choose a model designed to withstand moisture and dust, and follow its instructions for mounting and air-filter placement. Weather resistance does not mean the compressor can be submerged.

Does an air horn need an air compressor?

Yes, a vehicle air horn uses a compressor to supply the air that makes it honk. The compressor may be built into the horn, mounted separately, or part of a compatible onboard air system already installed on the vehicle.

Not every air horn needs an air tank. A direct-drive air horn gets air from its compressor when you press the horn button. A horn designed for an onboard air system uses stored air from a tank, which the compressor refills between uses.

If you want to avoid a compressor altogether, look for an electric horn that works without compressed air. Be sure to check how it operates: a horn advertised as “electric” or “tankless” may still use a small compressor.

Why does my air compressor turn on and off by itself?

In an onboard air system, the pressure switch turns the compressor on when tank pressure falls to its cut-in setting and off when it reaches cut-out. As you use air, pressure drops and the compressor refills the tank. This automatic cycling is normal.

If the compressor repeatedly restarts when no air is being used, watch the tank gauge for ongoing pressure loss. Leaks in air lines, fittings or valves can let pressure fall far enough to trigger another refill. Check those connections for leaks before assuming the pressure switch has failed.

Rapid switching without the expected pressure changes calls for a check of the pressure switch, relay and electrical supply. A thermally protected compressor may also stop if it overheats. Switch it off and follow its cooling instructions; disconnect power and release stored pressure before repairs.

Can one compressor run horns, air bags, and tire inflation?

Yes, one onboard air system can supply your train horns, air bags and tire-inflation hose, provided it can meet their air requirements. They can share the same compressor and tank, with separate connections and controls for each use.

Sharing an air supply doesn’t mean everything should run at the same pressure. Your horns and air bags may need different pressures, so follow each manufacturer’s requirements and use a regulator where needed. If you already have an air-suspension compressor kit, check that it supports additional accessories before connecting horns or a tire hose.

How often you use those accessories also matters. Honking occasionally and topping off a tire give the compressor more time to recover than repeatedly airing up tires or adjusting the suspension. A larger tank provides more stored air, but the compressor still needs to refill it without exceeding its duty-cycle limits.

Do I need a 12-volt or 24-volt air compressor?

Choose the compressor that matches the electrical supply in your vehicle: a 12-volt air compressor for a 12V system, or a 24-volt air compressor for a 24V system. The two are not interchangeable, so confirm your vehicle’s voltage before ordering.

Having two batteries does not automatically mean you need a 24-volt compressor. Two 12V batteries connected in parallel still provide 12 volts; connected in series, they provide 24 volts. If you are unsure how your vehicle is set up, check its documentation or have your installer confirm the supply voltage.

A 24-volt compressor is not automatically more powerful or faster than a 12-volt model. Once you know which voltage you need, compare airflow, tank refill times and duty cycle to find a compressor that can keep up with how you plan to use it.

Do air compressors drain the car battery?

An onboard air compressor should not drain your car battery during normal use with the engine running, provided the charging system can support it. It can drain the battery if it runs with the engine off—even when the key is in the on or accessory position.

We strongly recommend keeping the engine running whenever the compressor operates. This allows the alternator to supply power instead of relying on the battery alone. As a battery discharges and its voltage drops, the compressor can draw excessive current, potentially blowing fuses or overheating the compressor and wiring.

When correctly wired to an ignition-controlled connection, the compressor cannot run with the ignition off, helping prevent battery drain while parked. Just make sure the engine is running whenever you use the compressor, and avoid leaving the key in the on or accessory position with the engine off. With proper wiring and a charging system that can support the compressor, normal use should not drain your battery.

HOW DOES AN AIR COMPRESSOR PRESSURE SWITCH WORK?

An air compressor pressure switch automatically starts and stops the compressor based on tank pressure. It turns the compressor on at the lower cut-in pressure and off at the upper cut-out pressure, keeping air ready without you having to switch the compressor on and off yourself.

When the system is correctly wired to an ignition-controlled power source, this happens automatically while the vehicle is on. Turning the vehicle off prevents the compressor from running and draining the battery while parked. That protection comes from the wiring setup, not the pressure switch alone.

Inside a typical mechanical pressure switch, air pressure moves a diaphragm that opens or closes electrical contacts. These control the air compressor directly or through a relay that handles the air compressor’s electrical load. For example, a 110–150 PSI switch starts the compressor at 110 PSI and stops it at 150 PSI.

The pressure switch controls normal operation, while a separate safety blow-off valve provides backup pressure relief if the system overpressurizes.

HOW DOES AN AIR COMPRESSOR WORK?

An air compressor uses power from a motor or engine to increase air pressure. In a piston compressor, a moving piston draws air into a cylinder, squeezes it into a smaller space and pushes it out through a discharge valve. Rotary screw compressors use rotating screws to compress the air instead.

The compressed air travels through an air line to inflate tires or operate equipment such as air tools and train horns. In an onboard air system with a tank, the tank stores air for use, and a pressure switch starts and stops the compressor as tank pressure falls and rises between its set limits. Other setups deliver air directly without a storage tank.

WHAT AIR COMPRESSOR DO I NEED?

If you mainly need to inflate tires, a portable air compressor is a practical starting point. Look for published fill times for a tire size and pressure range similar to yours, especially if you’ll be airing up several tires after driving off-road.

For train horns, an onboard air system with a compressor and tank keeps air ready when you need it. If you’re replacing the compressor in an existing system, check its voltage, pressure rating and recommended tank size. For air suspension, check the air bags’ pressure requirements and whether the compressor kit includes the valves and switches needed to inflate and deflate them.

If you want to run air tools too, compare the tool’s air consumption (CFM) with the compressor’s output at the required pressure (PSI). A tank can supply short bursts, but repeated or longer use depends on how quickly the compressor refills it. That’s where duty cycle matters: it tells you how much running time is allowed before a cooling break under the manufacturer’s specified conditions.

WHAT IS THE AIR COMPRESSOR USED FOR?

An air compressor supplies pressurized air for inflating tires, operating air horns, adjusting air suspension and running pneumatic tools such as impact wrenches, nail guns and paint sprayers.

On a vehicle, an onboard air system makes that air available wherever you travel. You can use it to air tires back up after driving off-road, supply the air tank for train horns, or add air to suspension bags for ride-height or load-leveling adjustments.

The equipment you can run depends on the compressor and the rest of the air system. A setup that handles occasional tire inflation may not keep up with a spray gun running for several minutes. Check the equipment’s pressure and airflow requirements, along with the compressor’s operating limits, before connecting it.

CAN I USE AIR TOOLS WITH MY AIR COMPRESSOR?

Yes, if your air system can supply the tool’s required pressure and enough air for the task. An air tank can power short bursts even when the tool uses air faster than the compressor produces it. Allow the tank to refill between uses; longer or repeated operation depends on compressor output and duty cycle.

Check the tool’s required PSI and air consumption, then compare compressor output at that working pressure. For sustained use, check whether the tool’s CFM rating describes average or continuous consumption. For intermittent use, consider the tank’s usable reserve and refill time. Maximum PSI or CFM at 0 PSI alone does not establish compatibility.

Some compressors can run compatible air tools without a tank. Check the manufacturer’s instructions for the specific compressor, tool and operating conditions before using a tankless setup.

which air compressor is the quietest?

How an air compressor is mounted can make a big difference in how loud it sounds. A compressor that isn’t fully secured can vibrate or rattle against its mounting surface, adding noise. All HornBlasters compressors include rubber feet to help reduce vibration, so if your compressor seems loud, check that it’s securely mounted and that the feet are installed correctly.

If you’re looking for a compressor specifically designed for quieter operation, consider the HornBlasters 3Q. The upcoming generation uses thicker rubber feet to absorb more vibration and reduce noise, replacing the previous spring-mounted design.

WHAT SIZE AIR COMPRESSOR DO I NEED FOR TRAIN HORNS?

Train horns can work with a small onboard air compressor and a tank as small as 0.5 gallons, depending on the horn and how long you want it to honk. You don’t necessarily need a large compressor or tank for occasional short honks. The compressor needs to support the horn’s required operating pressure and be rated for the tank you’re using.

A larger tank gives you more air for longer honks. For example, a 2-gallon tank provides more reserve than a 0.5-gallon tank, while a 5-gallon tank holds more still. How long that air lasts depends on the horn’s air consumption and the tank pressure.

The compressor determines how quickly that air is replaced. If you honk frequently, compare published refill times for your tank size and pressure range, along with the compressor’s duty cycle. A faster compressor reduces the wait between uses, while a higher duty cycle allows more running time under its specified conditions.

CAN I USE A PORTABLE AIR COMPRESSOR TO INFLATE LARGE TRUCK TIRES?

Yes, a suitable portable air compressor can inflate large truck tires. Choose a model that supports your tire size and required pressure, then check its inflation times and duty cycle to understand filling speed and required cooling breaks.

Topping off a tire takes less air than reinflating it after airing down. If you regularly inflate several large tires, compare published fill times for a similar tire size and starting-to-target pressure range. Maximum PSI alone does not tell you how quickly a compressor will complete the job.

Large tires do not automatically require an onboard air system. A portable compressor can handle the task when its capacity and operating limits suit your needs.

WHAT MAINTENANCE DOES AN AIR COMPRESSOR NEED?

Air compressor maintenance includes checking the intake filter, keeping the compressor clean, and inspecting hoses, wiring and mounting hardware for wear or loose connections. If your system has an air tank, draining the collected moisture is also important to help prevent corrosion and water buildup in the air lines.

A dirty intake filter restricts airflow, so replace it when needed, or clean it only if the manufacturer says it is washable. Keeping dirt off the cooling fins and motor housing also helps the compressor release heat. While checking the system, look for damaged hoses and leaking fittings that could make the compressor run more often.

Oil-less compressors do not need oil added. If yours is oil-lubricated, check the oil level and follow its maintenance instructions for the correct lubricant and service intervals.

Your manual provides the schedule for your particular compressor, but dusty conditions, humid weather and frequent use can mean more frequent filter checks or tank draining. Before tightening connections or removing parts, disconnect power, let the compressor cool and release the system’s air pressure.

how long does it take to fill an air tank?

Filling an onboard air tank usually takes a few minutes, but there isn’t one fill time that applies to every setup. A larger tank or a higher target pressure takes longer to fill with the same compressor. A compressor that delivers more air at the required pressure fills it faster, and topping off a partially filled tank takes less time than starting from empty.

For example, the HornBlasters HB-1NM fills a 2-gallon tank from 0 to 150 PSI in about 2 minutes, compared with about 6 minutes 45 seconds for a 5-gallon tank. If the tank still has 110 PSI, refilling to 150 PSI takes about 35 seconds for the 2-gallon tank or 2 minutes for the 5-gallon tank.

Those are published test figures using a 13.8-volt power supply. To estimate your own fill time, check your compressor’s fill-rate chart for your tank size and pressure range. Actual times can vary with the installation and operating conditions.

What size air compressor do I need for air tools?

Choose an air compressor by your tool’s required pressure (PSI), airflow (CFM) and how long you use it at a time. For continuous operation, compare the tool’s air consumption with compressor output at that working pressure and check the compressor’s duty-cycle limits. For short bursts, stored tank air can supply demand above compressor output, with recovery between uses.

Occasional nailer or brad-gun use may suit a small compressor and tank. A compatible ½-inch impact wrench can also use stored air for short bursts. Paint sprayers used for longer stretches need more sustained airflow; if tools run together, add their air requirements.

A 2–5-gallon tank provides a reserve, but useful runtime depends on how much air the tool consumes and how far tank pressure can fall while still supplying its required pressure. Check the compressor’s recommended tank size, refill times and cooling requirements. For a vehicle-mounted compressor, also check that the electrical system can support it.

How long can an air compressor run continuously?

Some air compressors can run continuously, while others need time to cool down between uses. How long yours can run depends on its duty cycle, operating pressure and temperature. Check the compressor’s instructions for its maximum running time and how long it needs to cool before starting again.

A 50% duty cycle means the compressor can run for half of the manufacturer’s specified period and needs the other half to rest. The percentage alone does not tell you how many minutes it can run without stopping. Likewise, a 100% duty cycle at 100 PSI does not necessarily allow continuous operation at 200 PSI.

In an onboard air system, the pressure switch normally stops the compressor once the tank is full. Repeatedly inflating large tires or running air tools can keep it working much longer than occasional horn use, so those jobs need to stay within its operating limits. If thermal protection shuts the compressor down, switch it off and follow its cooling instructions before using it again.