Ready to sound like a ship captain on the high seas? Look no further than the Mini Tug 228H air horn kit. Say goodbye to that boring car horn and hello to the classic tugboat sound you've always wanted.
Don't let its single bell fool you - the Mini Tug air horn packs a punch with its deep, low tone. And at 24 inches long, it's longer than your average air horn, giving you that classic tugboat sound. We even made installation a breeze by pre-installing the required 1/4" air valve.
With our 228H air source included, you're good to go with an easy install since the tank and compressor are already prewired and plumbed together. We've taken all the hassle out of the installation.
(Note: Tank-mounted air compressors are not fully sealed. For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc... Failure to mount this product as directed will void the warranty)
**Detaching the compressor from the tank will void your warranty on this kit. If you need a solution where the compressor is detached, please look at our 232 and higher models. **
2.0 GALLON TANK | FILL RATE |
---|---|
0 to 145 PSI | 3 min. 40 sec.(± 10 sec.) |
110 to 145 PSI | 1 min. 15 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
This product produces extreme loudness. Proper hearing protection must be worn at all times during its operation. Hearing loss or permanent damage may result from unsafe use. Use this product in a safe and responsible manner and at a distance of at least 100 meters from others. Never operate this product in a closed environment, in close proximity to living beings, or where prohibited by law.
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.