This is William's 2011 Ford F150 and this is his Train Horn Install. The kit installed below on his truck is our Conductor's Special 228V Train Horn Kit. This kit contains our Shocker XL Train Horns, that are packed with intense loudness and authentic Train Horn sound! With the tank and compressor unit not be fully sealed it needed to be mounted somewhere out of the elements. So placing these units in a toolbox as he did below is perfect for this system.
UP TO 1500% LOUDER
UNLIMITED HONKING
ZERO
DELAY
CAPABLE ONBOARD AIR SYSTEM
SPECIFICATIONS
| Part Number | HK-S4-228H |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker XL train horn |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Horn Flare | 5″ (127 mm) |
| Air Source Unit | HornBlasters 228H air source unit |
| Air Source Length | 19″ (482.6 mm) |
| Air Source Width | 6.25″ (158.75 mm) |
| Air Source Height | 14.5″ (368.3 mm) |
| Air Source Weight | 17.15 lb (7.78 Kg) |
| Air Tank | 2.0 gallon |
| Volume | 2 gal (8.8 L) |
| Max Amperage | 25 amps |
| Maximum Duty Cycle | 30% @ 100 PSI |
Who’s ready to take their setup to the next level like William? Click the button below to submit your install photos to our media submission form!