Can you install a train horn on a 2013 Ram 3500?

Yes. This 2013 Ram 3500 was fitted with the Tug-37 228H Tug Air Horn Kit from HornBlasters. Our train horn kits are designed to fit almost any vehicle with room to mount the horns and air system.

What train horn kit fits a 2013 Ram 3500?

This build uses the Tug-37 228H Tug Air Horn Kit. It is a complete kit with the horns, compressor, and air tank, and it can be mounted on a 2013 Ram 3500 or nearly any other vehicle. Shop it here: https://hornblasters.com/products/tug-37-228v-tug-horn-kit.

Front three-quarter view of two-tone black and tan Ram 3500 dually parked on gravel in wooded mountain setting

Low-angle view of black train horn trumpet mounted on chrome rod under vehicle

HornBlasters air compressor and tank mounted on plate under rusted exhaust on vehicle chassis

Close-up of black horn solenoid with braided air line and blue wiring mounted under vehicle

01 / 06

Video

Progress

01

02

03

04

05

06

Featured Install

Tug-37 228H Tug Air Horn Kit

David's 2013 RAM 3500

Sound Sample

0:00 0:00

Owner David

Year 2013

Vehicle 2013 RAM 3500

David W. just took his 2013 Dodge RAM 3500 to a whole new level of loud with the HornBlasters Tug-37 228H Tug Air Horn Kit. This setup delivers that deep, commanding tugboat blast that turns heads and clears lanes like nothing else.

The install looks absolutely clean, and the sound? Let’s just say the neighbors definitely know when David’s rolling through. With the signature low-tone rumble and marine-grade build, this Tug Air Horn Kit transforms any truck into a rolling powerhouse.

Key Features:

Authentic tugboat-style tone
Marine-grade durability built for long-lasting performance
228H air system for fast recovery and consistent power
Clean and professional installation for a seamless look

HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit

PRODUCT

PRICE

Sold out

UP TO 1500% LOUDER

UNLIMITED HONKING

ZERO
DELAY

CAPABLE ONBOARD AIR SYSTEM

Ready to make some serious noise?

Upgrade your ride with the Tug-37 228H Tug Air Horn Kit and experience that unmistakable tugboat blast everywhere you go.

SPECIFICATIONS

Part Number	HK-T37-228H
Operating Pressure	150 PSI
Restart Pressure	110 PSI
Voltage	12-Volt DC
Horn	Tug-37 Tugboat air horn
Horn Air Inlet	1/2" NPT
Horn Length	37" (939.8 mm)
Horn Base Height	5.75" (146.05 mm)
Horn Flare	7" (177.8 mm)
Horn Weight	6.91 lb (3.17 Kg)
Air Source Kit	HornBlasters 228H air source unit

Operating Pressure	145 PSI
Restart Pressure	110 PSI
Air Source Length	18.9" (480.6 mm)
Air Source Width	5.9" (149.86 mm)
Air Source Height	13.7" (347.98 mm)
Air Source Weight	17.15 lb (7.78 Kg)
Air Tank	2-gallon 5 port air tank
Volume	2.0 gal (8.8 L)
Air Compressor	HB-2 air compressor
Max Amperage	19 amps
Maximum Duty Cycle	30% @ 100 PSI

FILL RATES

2.0 GALLON TANK	FILL RATE
0 to 145 PSI	3 min. 40 sec.(± 10 sec.)
110 to 145 PSI	1 min. 15 sec. (± 05 sec.)

Train Horn FAQ

Yes, the Tug-37 228H Tug Air Horn Kit is a complete system. It includes the Tug-37 tugboat air horn, 228H air source unit with 2-gallon tank, HB-2 compressor, hoses and fittings, wiring, pressure switch, and all mounting hardware needed for installation.

The Tug-37 delivers an authentic tugboat-style blast with a deep, low-tone rumble that's distinct from train horn chords. It's built with marine-grade materials for durability and delivers that commanding tugboat sound that turns heads.

The 2-gallon tank provides 3-5 seconds of continuous honking at 145 PSI. After use, the system refills from 110 to 145 PSI in about 1 minute 15 seconds, keeping you ready for repeated blasts.

The kit includes an HB-2 air compressor with a 30% duty cycle at 100 PSI. It refills the 2-gallon tank efficiently and can handle tire inflation or small air tools beyond just powering the horn.

Yes, the Tug-37 228H Tug Air Horn Kit is designed to fit under full-size trucks like the RAM 3500. The 37-inch horn and compact 228H air source unit can be positioned to fit your specific setup while maintaining a clean, professional installation.

Got a HornBlasters install you’re proud of?
Send us your photos and build details for a chance to be featured in our gallery and show how you kill the silence. Click the button below to submit your install photos to our media submission form!