Conductor's Special 240 Spare Tire Delete Kit (Fastest Recovery to Continue Honking)

Pick up our fastest filling Conductor’s Special Train Horn Kit made for our Spare Tire Delete Kit! Our Spare Tire Delete Bracket cuts down install time in half and gives you a clean and compact way to install your Conductor’s Special 240 Train Horn Kit! 

Our Conductor’s Special 240 Train Horn Kit was designed for people who don’t like to wait to blast their horns. We paired our insanely loud Shocker XL Train Horns with one of the fastest-filling onboard air systems you can buy, allowing you to blast some of the loudest horns available as much and as often as you can get away with!

For an onboard air system optimized from the ground up for train horns, there are no better horns to pair it with than our Shocker XL Train Horns. Hand-tuned to the US Train Horn Chord specifications, our Shocker XL Horns in our Conductor’s Special 240 Train Horn Kit gives you the authentic tone of a locomotive with the volume to match. Constructed from an ultra-durable fiberglass-reinforced ABS composite with stainless-steel diaphragms and backed by a lifetime warranty against manufacturer's defects, you can rest easy knowing this is the last train horn kit you will ever have to purchase.

What sets the Conductor’s Special 240 Train Horn Kit apart from our other Conductor’s Special Kits is the speedy Viair 400C Air Compressor. While it may not have as long of a duty cycle as other compressors in its class, it is one of the fastest-filling compressors available, allowing you to recharge your tank in less than 50 seconds! Along with our water-resistant 2-gallon tank providing our Shocker XL Horns with enough air to honk for up to 4 seconds continuously, you get one of the loudest and fastest train horn kits you can buy.

Installing your Conductor’s Special Train Horn Kit has never been easier or cleaner than with the introduction of our Spare Tire Delete Brackets. All full-size truck owners and plenty of mid-sized truck owners are ditching their factory spare tire in favor of one of our Spare Tire Delete Brackets for their train horn kit. Not only does our bracket make any install look like a professional install but it also saves you the most valuable resource of all, time! Whether you are a DIY master or are having it professionally done our Spare Tire Delete Bracket turns what used to be a 6-8 hour install into a 3-4 hour install. 

Also, the 6 horn upgrade does not fit on this bracket. The two horns would have to be mounted somewhere off of the bracket.

**This Kit Fits Most Full Size Pick Up Trucks**  

CUSTOMER VIDEO REVIEW OF THESE HORNS

• High-efficiency & Extremely Loud
• Stainless Steel Diaphragms Won't Rust!
• Manifold-less Design For Flexible Installation
• All-inclusive Train Air Horn Solution!
• Heavy Duty Compressor For Faster Fills!
• All Standard Mounting Hardware
• Max Honk Time: 5 to 7 Seconds
• It can be heard from almost miles away!
• Powdercoated Black Finish 
• Made from 14 Gauge Steel
• Quick & Easy Install

• Shocker S4 Train Horns
• Spare Tire Delete Bracket
• 2 Gallon Air Tank
• Viair 400C Compressor
• Viair 110/150 With Built In Relay PSI Pressure Switch
• Remote Mountable Intake Filter Assembly
• Air Filter Cartridges
• 10 ft of 5/16 in D.O.T. Approved Air line
• 17 ft of 1/2 in D.O.T. Approved Air line
• 6 ft of 3/8 in Air Line (For Intake)
• 18 ft of 12 Gauge Power Wire
• 1/2 in NPT Electric Solenoid Valve
• HornBlasters 200 PSI Air Gauge
• Brass NPT Fittings Kit Including Safety Valve and Blow-off
• Wiring & Plumbing Kit
• Mounting Hardware
• Detailed Instructions

• Part Number: HK-S4-240-STDK
• Horn: Shocker 4 Train Horn Kit
• Material: High-Impact ABS
• Horn Measurements

• № 1 19.50″ (495.30 mm)	№ 2 16.25″ (412.75 mm)
  № 3 14.75″ (374.65 mm)	№ 4 12.75″ (323.85 mm)

• Flare: 5″ (127 mm)
• Weight: 4.5 lb (2.04 Kg)
• Fitting Size: ⅛″ M NPT
• Tank: 2 Gallon Tank
• Rated Pressure: 300 PSI
• Burst Pressure: 800 PSI
• Length: 17" (431.8 mm)
• Diameter: 6" (152.4 mm)
• Height: 7" (177.8 mm)
• Weight: 10 lb (4.54 Kg)
• Compressor: Viair 400C Air Compressor
• Voltage: 12 volts DC
• Air Flow: 2.54 CFM at Free Flow
• Average Fill Time: 42 Sec
• Max Amperage: 26 amps
• Maximum Duty Cycle: 33% @ 100 PSI
• Maximum Working Pressure: 150 PSI
• Compressor Length: 9.0" (228.6 mm)
• Compressor Width: 4.0" (101.6 mm)
• Compressor Height: 7.00" (177.8 mm)
• Compressor Weight: 8.00 lb (3.63 Kg)
• Bracket Length: 19"
• Bracket Width: 19"
• Bracket Height: 7.5"
• Bracket Weight: 6 lbs
• Assembled Length: 21"
• Assembled Width: 23"
• Assembled Height: 13"
• Assembled Weight: 40 lbs

• HornBlasters Spare Tire Delete Instructions

• Money-Back Guarantee/Refund Policy
  All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.
• Warranty
  Our Shocker XL Train Horns are backed by our Lifetime Manufacturer's Defect Warranty and the rest of the components in this kit are backed by our One-Year Manufacturer's Defect Warranty.
• HornBlasters.com Satisfaction Guarantee
  HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.
• Cross-Shipments
  HornBlasters.com will not cross-ship returned merchandise.
• Physical Damage Policy
  Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.