Conductor's Special 232 Spare Tire Delete® Kit

$1,148.98
$1,148.98

EASY ON THE INSTALL AND THE WALLET.

Transform your vehicle's presence on the road with the Conductor's Special 232 Train Horn Kit. Priced with the discerning driver in mind, this kit is tailored to sync flawlessly with our innovative Spare Tire Delete Bracket . At its core is the Shocker XL train horn , emanating authentic, robust notes reminiscent of real train horns. Supported by a resilient 2-gallon air tank and the trusted HornBlasters 3Q air compressor , you're ensured 3-5 seconds of honk time, with a rapid recovery of under two minutes.

No more enduring lengthy installations. Our Spare Tire Delete Brackets, ideal for most full-size and mid-size trucks, revolutionize the setup process. By replacing the standard spare tire, these brackets facilitate a sleek installation, reducing time from an exhaustive 6-8 hours to a mere 3-4 hours.

  • Bracket Excellence: Crafted from robust 14-gauge steel and protected by a two-stage powdercoat, ensuring longevity and a sleek appearance.
  • Make Your Presence Known: With a sound that reverberates for miles, this kit ensures your vehicle stands out in any crowd.
  • Complete & Ready-to-Install Kit: Everything you need from start to finish is included, ensuring a smooth setup and letting you honk with confidence in no time.
  • Weather-Resistant Design: This kit is built to brave the elements, ensuring reliable performance regardless of the conditions.
  • Robust Horn Construction: Crafted from fiberglass-reinforced ABS combined with stainless steel internals, these horns guarantee both longevity and unparalleled sound clarity.

Important Notes:

  • Fits most full-size pickups.
  • The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
  • Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.
  • VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
Do you worry about your car being broken into? Our horn kits can help you turn your car into the ultimate alarm system. By connecting the kit to your factory horn, you can not only deter thieves with the loud noise but also alert yourself and those around you of any potential break-ins. Don't let thieves get away with your personal belongings - protect your car with our horn kit today!
The video in the link below shows the installation process for our Spare Tire Delete kits!

CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO

The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!

CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS

  • Part Number: HK-S4-232-STDK
  • Operating Pressure: 150 PSI
  • Restart Pressure: 110 PSI
  • Voltage: 12-Volt DC
  • Horn: Shocker 4 Train Horn Kit
  • Horn Material: High-Impact ABS
  • Horn Measurements

  • № 1 19.50″ (495.30 mm)

    		 № 2 16.25″ (412.75 mm)
    № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm)
  • Horn Flare: 5″ (127 mm)
  • Air Tank: HornAir 2-gallon 6 port air tank
  • Tank Length: 17" (431.8 mm)
  • Tank Diameter: 6" (152.4 mm)
  • Tank Height: 7" (177.8 mm) (With Legs)
  • Tank Weight: 10 lb (4.54 Kg)
  • Air Compressor: HornBlasters 3Q air compressor
  • Max amperage: 20 Amps
  • Maximum duty cycle: 100% @ 100 PSI
  • Flow Rate @ 0 PSI: 1.41 CFM
  • Compressor length: 10.1″ (256.54 mm)
  • Compressor width: 4.5″ (114.3 mm)
  • Compressor height: 7″ (177.8 mm)
  • Bracket Length: 19"
  • Bracket Width: 19"
  • Bracket Height: 7.5"
  • Bracket Weight: 6 lbs
  • Assembled Length: 21"
  • Assembled Width: 23"
  • Assembled Height: 13"
  • Assembled Weight: 40 lbs
12-VOLT COMPRESSOR
2.0 GALLON TANK FILL RATE
0 to 150 PSI 2 min. 55 sec. (± 10 sec.)
110 to 150 PSI 55 sec. (± 05 sec.)

* Supply Voltage: 13.8 Volts

  • Money-Back Guarantee/Refund Policy
    All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.
  • Warranty
    Our Shocker XL train horns are backed by our lifetime manufacturer's defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer's defect warranty!
  • HornBlasters.com Satisfaction Guarantee
         HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.
  • Cross-Shipments
         HornBlasters.com will not cross-ship returned merchandise.
  • Physical Damage Policy
    Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
Go to full site