Wanting to get onboard air but aren't sure where to start? Our HornAir 232 Onboard Air System is the go-to onboard air kit for many customers just getting started. Our HornAir 232 Onboard Air System is a complete 150 PSI kit that has everything you need to get onboard air for your ride.
Our HornAir 232 Onboard Air System comes complete with all necessary fittings, including a Viair 110/150 Pressure Switch with a built-in relay, safety blow-off, air gauge, and drain cock. Unlike many other onboard air systems, ours comes with 10 and 18 gauge wire, as well as a complete wiring kit including a fuse holder.
Included is our Black 2-Gallon 6 Port Air Tank, which has four 1/4" ports and two 1/2" ports. Strategic placement of the ports allows you to install your drain cock on the bottom-most port on the tank for optimal draining no matter how the air tank is oriented. The 1/2” ports provide optimal airflow, preventing bottlenecking that occurs in other kits.
At the heart of our HornAir 232 Onboard Air System is Viair's flagship medium-duty quick-recharge air compressor, the Viair 325C. As a fast-fill compressor, the Viair 325C can recharge the HornAir 232 tank from 110 PSI to 150 PSI in just 1 minute and 10 seconds, all while pulling only 21 amps! Our HornAir 232 Onboard Air System is perfect for light pneumatic applications such as emergency tire inflation or load-leveling air springs. The separate tank and compressor unit is fully sealed and able to be mounted outside and exposed to the elements.
While our HornAir 232 Onboard Air System is a complete onboard air system that provides you with everything you need to get up and going, be sure to add on a Wireless Remote, Tire Inflation Kit, and/or an Electric Drain Valve kit to get the most out of one of the best onboard kits on the market!
Please Note: This HornAir system is not recommended for AirChime horns. We recommend using at least a 4-gallon tank with larger-scale train horns like the P3, P5, K3, and K5; however, this kit is perfect for HornBlasters Shocker horns and Outlaw and Bandit series horns.
* Supply Voltage: 13.8 Volts
|2.0 GALLON TANK||FILL RATE|
|0 to 105 PSI||2 min. 35 sec. (± 10 sec.)|
|85 to 105 PSI||40 sec. (± 05 sec.)|
|0 to 145 PSI||4 min. 15 sec. (± 10 sec.)|
|110 to 145 PSI||1 min. 25 sec. (± 05 sec.)|
* Supply Voltage: 13.8 Volts
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Installation was so straightforward you can’t make a mistake. The only thing that takes time is being fussy how are you want the presentation. When I finally got away from the house and blew the horn on the highway it was so sweet, such a wonderful tone, and of course.....SUPER LOUD!! This set up is something to be proud of for sure.