Brandon’s 1981 Dodge B350 Packs Loud Flatlaw 3-Liter Train Horn Kit

1981 Dodge B350

Flatlaw 3 Liter Train Horn Kit

SOUND SAMPLE:

EXPAND GALLERY

CONTINUE TO INSTALLATION →

Brandon J. gave his 1981 Dodge B350 van a serious upgrade by installing the HornBlasters Flatlaw 3-Liter Train Horn Kit, bringing modern volume to this classic ride. The compact Flatlaw kit fits snugly into the B350’s vintage chassis, making it one of the cleanest sleeper installs we’ve seen on a retro van.

Don’t let the size fool you, this small kit delivers massive sound, turning heads and shaking streets wherever Brandon takes it. It’s the perfect fusion of old-school character and new-school noise.

Whether you're a vintage van lover or just want something loud in a compact form, Brandon's setup proves that classic vehicles can still bring the heat, and the honk.

Feature Highlights

Flatlaw low-profile horn assembly designed for tight mounting locations
3-liter integrated tank and compressor operating at 120 PSI
Approximately 2-minute fill time with 35-second recovery
Complete wiring and relay kit for quick installation
Perfect stealth upgrade for classic vans like the 1981 Dodge B350

STEALTH SOUND, MAXIMUM IMPACT

Give your classic ride a modern voice with the Flatlaw 3-Liter Train Horn Kit, just like Brandon’s Dodge B350. It keeps the van’s lines clean while delivering a powerful horn blast that makes sure you are heard the moment you roll in.

UP TO 1500% LOUDER

UNLIMITED HONKING

ZERO
DELAY

CAPABLE ONBOARD AIR SYSTEM

HornBlasters Shocker S6 544K Nightmare Edition Train Horn Kit

PRODUCT

PRICE

Sold out

SPECIFICATIONS

Part Number	HK-F3B-M3
Horn	Flatlaw train horn
Horn Length	17.5" (444.5 mm)
Horn Width	16.25" (412.75 mm)
Horn Height	8" (203.2 mm)
Horn Weight	12.5lbs (5.67 kg)
Voltage	12-Volts DC

Air Source Kit	3-Liter air compressor & tank combo
Operating Pressure	120 PSI
Restart Pressure	90 PSI
Air Source Length	16.535" (420mm)
Air Source Width	4.921" (125mm)
Air Source Height	7.086" (180mm)

FILL RATES

3-LITER AIR TANK	FILL RATE
0 to 120 PSI	2 min. (± 10 sec.)
90 to 120 PSI	35 sec. (± 05 sec.)

Test Your Train Horn Knowledge

1 of 5

Train Horn FAQ

The Flatlaw kit includes the low-profile Flatlaw horn assembly, a 3-liter (0.79 gallon) tank with integrated compressor, 120 PSI pressure switch (90 PSI restart), wiring harness, relay, airline, and mounting hardware. Brandon fit the entire setup inside his 1981 Dodge B350 without sacrificing cargo space.

Despite its compact footprint, the Flatlaw produces a powerful, deep tone that far outclasses stock vehicle horns. It is engineered to deliver a true train horn presence while staying stealthy under the van.

The onboard compressor runs on 12-Volt DC, draws up to 20 amps, and charges the 3-liter tank from 0 to 120 PSI in roughly 2 minutes (±10 seconds). Recovery from 90 to 120 PSI is about 35 seconds, so Brandon can honk repeatedly without long waits.

The integrated system is primarily designed for the horn, but it can provide short bursts of air for light-duty tasks such as inflating small tires or blowing off debris. For extended air tool use, upgrade to a larger onboard air system.

The Flatlaw’s low profile and all-in-one design make it ideal for vintage builds where space is at a premium. Brandon preserved the B350’s clean interior while gaining a horn that’s up to 1500% louder than stock.

Show Off Your Install
Have a HornBlasters setup you’re proud of? Submit your photos and let us feature your ride in our next showcase!

MEDIA SUBMISSION