Gavan's 1995 Jeep Wrangler features one of the loudest horns ever made, the Nathan AirChime K3LA. This variation of the K3 is an actual railway-use horn used on many commercial train lines in the USA. If you’ve heard a diesel locomotive barrelling down its tracks and blowing its horn, then more than likely this is the same horn you’ve heard. This kit contains everything you need to install it on any vehicle. An extremely loud train horn that is still in use on real locomotive engines, a five gallon air reservoir to supply lots of air, a fast-fill air compressor to ensure fast refill rates, and all fittings and accessories needed to ensure stable and long term use!
UP TO 1500% LOUDER
UNLIMITED HONKING
ZERO
DELAY
CAPABLE ONBOARD AIR SYSTEM
SPECIFICATIONS
| Part Number | HK-K3-540 |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Nathan AirChime K3 |
| Horn Length | 18.25″ (463.55 mm) |
| Horn Width | 16.25″ (412.75 mm) |
| Horn Height | 9.75″ (247.65 mm) |
| Horn Weight | 32 lb (14.51 Kg) |
| Horn Air Inlet | ½″ Female NPT |
| Tank | HornAir 5-gallon air tank |
| Tank Length | 20.5″ (520.7 mm) |
| Tank Diameter | 9.5″ (241.3 mm) |
| Tank Height | 11.5″ (292.1 mm) (With Legs) |
| Tank Weight | 20 lb (9.07 Kg) |
| Tank Ports | x7 1/2", x1 3/4" |
| Air Compressor | Viair 400C air compressor |
| Average Fill Time | 1 Min 30 Sec |
| Voltage | 12 volts DC |
| Air Flow | 2.54 CFM at Free Flow |
| Max Amperage | 26 amps |
| Maximum Duty Cycle | 33% @ 100 PSI |
| Compressor Length | 9.0″ (228.6 mm) |
| Compressor Width | 4.0″ (101.6 mm) |
| Compressor Height | 7.05″ (179.07 mm) |
| Compressor Weight | 8.00 lb (3.63 Kg) |
Who’s ready to take their setup to the next level like Gavan? Click the button below to submit your install photos to our media submission form!