Compare electric horn size and power requirements
Tankless does not always mean compressor-free. The Compact Electric Horn has a built-in compressor, the Sniper uses a separate compressor, and the Oogah/Klaxon makes its sound with an electric motor. Compare these three options before choosing where to mount your horn.
| Horn | Mechanism | Component dimensions | Current draw at 12V |
|---|---|---|---|
| Stebel Compact | Dual-tone air horn; built-in compressor | 3″ long × 4.5″ wide × 4.5″ high | Up to 18A |
| Sniper | Single trumpet; separate compressor | Horn: 16.75″ × 3.5″ × 4″. Compressor: 4.5″ long × 2.5″ diameter | Up to 20A |
| Oogah/Klaxon | Motor-driven; no compressor | 9″ long; 4″ bell diameter | 2–4A |
These are component dimensions, not a vehicle-specific fit guarantee. Allow room for mounting hardware, wiring and any air tubing, and follow the selected horn’s installation instructions. A 12-volt connection alone does not establish that the factory horn circuit can supply the required current.
Frequently Asked Questions
What is an electric horn and how is it different from an air horn?
Electric describes the power source; air describes how the sound is produced. An electric air horn uses an electrically powered compressor to supply air to the horn. Some models have the compressor built in, while others use a separate compressor connected by tubing. The electric air horns in this collection work without an air tank. The motor-driven Oogah/Klaxon uses a motor instead of compressed air, while public address units use a speaker. For a horn system with a separate air tank and compressor, browse our complete air horn and train horn kits.
Is there such a thing as an electric train horn?
Some electrically powered horns produce a multi-tone sound, but that does not mean they work without compressed air. Our PsychoBlasters V2 uses a 12-volt direct-drive compressor and two trumpets, without an air tank. For a horn that requires an onboard air system, browse our complete horn kits. Compare the actual horn design and sound sample rather than relying on the word “electric” alone.
How hard is an electric horn to install?
It is the easiest install we sell. There's no air tank to mount and no onboard air system to plumb in. Where there is a compressor, it is either built into the horn or a small separate unit joined to it by the length of tubing in the box. Most installs are a matter of mounting the horn securely, running power through a relay, grounding it cleanly, and wiring the switch. If the horn sounds weak, check its power and ground connections against the model's installation instructions.
What does a public address unit do?
A public address unit adds a microphone and, on most models, siren tones alongside the horn output, so the same speaker can be used to talk or to signal. These are common on work trucks and utility vehicles. Options in this collection range from a compact electric horn up to a 100 watt public address unit with siren.

