Dites adieu aux compresseurs à moitié faits et bonjour au fidèle Viair 444C ! Depuis des années, ce bourreau de travail est le choix de prédilection pour alimenter les kits de klaxon de train et plus encore. Avec un cycle de service de 100 % à 100 PSI , le 444C est prêt à gérer n'importe quelle tâche qui lui est confiée, qu'il s'agisse d'alimenter votre suspension pneumatique, de gonfler vos pneus ou d'outils pneumatiques. Bien sûr, ce n'est peut-être pas le modèle le plus rapide du marché, mais le Viair 444C offre toujours des performances impressionnantes, avec une sortie de 1,76 CFM . Cette centrale électrique peut remplir un réservoir de 2,5 gallons de 165 à 200 PSI en moins de 90 secondes et un réservoir de 5 gallons en un peu moins de 3 minutes.
Ce compresseur d'air de 200 PSI à vendre est livré avec la possibilité d' y ajouter également notre kit de câblage de compresseur d'air de 40 A !
Remarque : utilisez un produit d'étanchéité pour filetage pour une installation correcte. Le ruban adhésif pour filetage n'est pas recommandé. Correctement scellé, le couple recommandé pour 1/8″ est de 10 à 11 pi-lb. Le couple recommandé pour 1/4″ et 3/8″ est de 12 à 15 pi-lb.
PSI | CFM | UN | BAR | LPM | UN |
---|---|---|---|---|---|
0 | 1,76 | 13 | 0 | 50,0 | 13 |
10 | 1,63 | 14 | 1.0 | 44.3 | 14 |
20 | 1,49 | 16 | 2.0 | 40,7 | 16 |
30 | 1.43 | 17 | 3.0 | 37,8 | 17 |
40 | 1.36 | 17 | 4.0 | 35.3 | 18 |
50 | 1.29 | 18 | 5.0 | 32,8 | 18 |
60 | 1.24 | 18 | 6.0 | 29,5 | 19 |
70 | 1.18 | 19 | 7.0 | 26.6 | 19 |
80 | 1.10 | 19 | 8.0 | 23,9 | 19 |
90 | 1.06 | 19 | 9.0 | 21.6 | 19 |
100 | 0,95 | 19 | 10.0 | 19.4 | 18 |
110 | 0,87 | 19 | 11.0 | 17.6 | 18 |
120 | 0,83 | 19 | 12.0 | 15.3 | 18 |
130 | 0,77 | 19 | 13.0 | 12.9 | 17 |
140 | 0,71 | 19 | 14.0 | 11.9 | 17 |
150 | 0,66 | 18 | |||
160 | 0,61 | 18 | |||
170 | 0,57 | 18 | |||
180 | 0,50 | 17 | |||
190 | 0,45 | 17 | |||
200 | 0,43 | 16 | |||
* Tension d'alimentation : 13,8 volts
RÉSERVOIR DE 2,5 GALLONS | TAUX DE REMPLISSAGE |
---|---|
0 à 200 PSI | 4 min. 50 s. (± 10 s.) |
165 à 200 PSI | 1 min. 32 s. (± 10 s.) |
RÉSERVOIR DE 5,0 GALLONS | TAUX DE REMPLISSAGE |
0 à 200 PSI | 10 min. 30 s. (± 15 s.) |
165 à 200 PSI | 2 min. 50 s. (± 05 s.) |
* Tension d'alimentation : 13,8 volts
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Compressor works great.
From start to finish amazing. I was in a pinch and got on the phone with somebody right away. They process my order and shipped it out same day and I received it next day (Tampa to Orlando)
Hornblasters is the best! I had a faulty compressor and pressure switch. They warrantied both parts and refunded me a amount for my delay in getting my horns installed. I got the new parts put on today and me and my family are so happy with the final outcome. My BEAST is loud now and you can hear me 4 miles away. Thanks so much.
Everything from Hornblasters was beyond compare. This compressor is astounding. Filled the system with a 3 gallon tank from zero to 200psi faster than I can even think, haven't timed it, but I would bet it is faster than advertised. I added a hose outlet under my bumper as well, didn't expect it to do much more than fill tires, be nice for top-offs, but I can actually run my IR 1/2 impact gun long enough to break 5 lug nuts loose. Let it recharge, you can spin them back on. The only negative at all, and I was kind of expecting it, it is not the quietest thing. I have it mounted on rubber isolators, repurposed my factory air suspension bracket for the job...but it is noticable, and you can feel the vibration when it is running...but I have a tiny leak in my system somewhere, so once I fix that, this will not have to run often.
Great 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌