Conductor's Special 2485 Platinum Train Horn Kit

The loudest train horns we make paired with our most powerful 2-gallon onboard air system. What’s not to love? With our Conductor’s Special 2485 Train Horn Kit, you can harness the tone and volume or a real train horn with an overpowered onboard air system that can just as easily support pneumatic tasks such as air inflation, air tools, and air suspension. This premium train horn kit was made for anyone who demands nothing but the best for their ride and happens to be the most powerful kit made to fit on our Spare Tire Delete Bracket.

Our legendary Shocker XL Train Horns featured in our Conductor’s Special 2485 Train Horn Kit are known for giving you the most bang for your buck. Hand-tuned to the US Train Horn Chord, our Shocker XL Train Horns don’t just come close to the real thing, they give you the same note-for-note tone that you will hear out on the rails and pack enough volume to stop anyone in their tracks. The four individual fiberglass-reinforced ABS composite bells that comprise of our Shocker XL Train Horns are nearly indestructible and are backed by our Limited Lifetime Warranty.

While the Conductor’s Special 2485 Train Horn Kit features some of our loudest horns, this system was designed for so much more than just blowing horns. Our Conductor’s Special 2485 Train Horn Kit is also an overpowered onboard air system with a 100% duty cycle that stays strong all the way up to 200 PSI, giving you a premium onboard air system that can stay running until the job is done. The powerful Viair 2485 Platinum Air Compressor featured in our Conductor’s Special 2485 Train Horn Kit will recharge our 2-gallon tank from 110-145 PSI in just under a minute, making sure you have your air on-demand whenever you need it.

An increasing number of people are using this for more than just blasting horns! With a system like the Conductor’s Special 2485 Train Horn Kit, you can also use the air supply to:

• Adjust Tire Pressure
• Moderate Pneumatic Use
• Inflate Water Toys and Safety Gear
• Supply Air to Load Leveling Bags
• Supply Air for Differential Lockers
• Blow up Kids Toys
• And lots more!

CUSTOMER VIDEO REVIEW OF THESE HORNS

• High-efficiency & Extremely Loud
• Stainless Steel Diaphragms Won't Rust!
• Manifold-less Design For Flexible Installation
• All-inclusive Train Air Horn Solution!
• Heavy Duty Compressor For Faster Fills!
• All Standard Mounting Hardware
• Max Honk Time: 5 to 7 Seconds
• It can be heard from almost miles away!

• Shocker S4 Train Horns
• 2 Gallon Air Tank
• Viair 485C Platinum Compressor
• Viair 110/150 With Built In Relay PSI Pressure Switch
• Remote Mountable Intake Filter Assembly
• Air Filter Cartridges
• 10 ft of 5/16 in D.O.T. Approved Airline
• 17 ft of 1/2 in D.O.T. Approved Airline
• 6 ft of 3/8 in Air Line (For Compressor Intake)
• 18 ft of 12 Gauge Power Wire
• 1/2 in NPT Electric Solenoid Valve
• HornBlasters 200 PSI Air Gauge
• Brass NPT Fittings Kit Including Safety Valve and Blow-off
• Wiring & Plumbing Kit
• Compressor Mounting Hardware
• Detailed Instructions

• Part Number: HK-S4-240
• Horn: Shocker 4 Train Horn Kit
• Material: High-Impact ABS
• Horn Measurements

  № 1 19.50″ (495.30 mm)	№ 2 16.25″ (412.75 mm)
  № 3 14.75″ (374.65 mm)	№ 4 12.75″ (323.85 mm)

• Flare: 5″ (127 mm)
• Weight: 4.5 lb (2.04 Kg)
• Fitting Size: ⅛″ M NPT
• Tank: HornAir 2 Gallon Tank
• Tank Length: 17″ (431.8 mm)
• Tank Diameter: 6″ (152.4 mm)
• Tank Height: 7″ (177.8 mm)
• Tank Weight: 10 lb (4.54 Kg)
• Compressor: Viair 485C Air Compressor
• Average Fill Time: 50 Sec
• Voltage: 12 volts DC
• Air Flow: 2.24 CFM
• Max Amperage: 23 amps
• Maximum Duty Cycle: 100% @ 100 PSI
• Maximum Working Pressure: 200 PSI
• Compressor Length: 11.5″ (292.1 mm)
• Compressor Width: 4.30″ (109.22 mm)
• Compressor Height: 6.5″ (165.1 mm)
• Compressor Weight: 11 lb (4.99 Kg)

• 2012 Jeep Wrangler JK

Refunds, Returns, & Warranty

• Money-Back Guarantee/Refund Policy
  All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly.
• Warranty
  Our Shocker XL Train Horns are backed by our Lifetime Manufacturer's Defect Warranty and the rest of the components in this kit are backed by our One-Year Manufacturer's Defect Warranty.
• HornBlasters.com Satisfaction Guarantee
  HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing.
• Cross-Shipments
  HornBlasters.com will not cross-ship returned merchandise.
• Physical Damage Policy
  Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.