The Rocker 127H air horn kit is designed for drivers who demand both exceptional sound clarity and a reliable onboard air system. This kit stands out with its ability to produce a loud and penetrating sound, essential for ensuring safety in noisy environments. Additionally, the Rocker 127H offers a robust air system capable of various functions beyond just honking the horn. It's fully weather-resistant and versatile enough to be mounted anywhere on your vehicle, making it ideal for any driving condition.
Equipped with a 1.5-gallon air tank and a pre-installed air compressor, the Rocker 127H is not only perfect for delivering long-lasting honks but also provides the capability to inflate tires and operate small air tools. This makes it an indispensable tool for road trips, daily commutes, and off-road adventures. Whether you're looking to enhance safety or functionality, the Rocker 127H air horn kit is designed to meet your needs.
**Detaching the compressor from the tank will void your warranty on this kit. If you need a solution where the compressor is detached, please look at our 232 and higher models. **
Part Number | HK-S2-127H |
Operating Pressure | 120 PSI |
Restart Pressure | 90 PSI |
Voltage | 12-Volt DC |
Horn | Rocker air horn |
Material | High-impact fiberglass reinforced ABS |
Length | Bell #1 14.75" (374.65 mm) Bell #2 12.75" (323.85 mm) |
Horn Flare | 5"(127 mm) |
Horn Weight | 2.25 lb (1.02 Kg) |
Air Source Unit | HornBlasters 127H air source unit |
Air Source Length | 15.2″ (386.08 mm) |
Air Source Width | 5.9″ (149.86 mm) |
Air Source Height | 12.8″ (325.12 mm) |
Air Source Weight | 13.75 lb (6.24 Kg) |
Air Tank | 1.5-gallon 4-port air tank |
Volume | 1.5 gal (6.6 L) |
Air Source Kit Compressor | 2L air compressor |
Max Amperage | 18 amps |
Maximum Duty Cycle | 25% @ 100 PSI |
1.5 GALLON TANK | FILL RATE |
---|---|
0 to 120 PSI | 2 min. 10 sec. (±10 Sec.) |
90 to 120 PSI | 35 sec. (± 5 Sec.) |
* Supply Voltage: 13.8 Volts
This product produces extreme loudness. Proper hearing protection must be worn at all times during its operation. Hearing loss or permanent damage may result from unsafe use. Use this product in a safe and responsible manner and at a distance of at least 100 meters from others. Never operate this product in a closed environment, in close proximity to living beings, or where prohibited by law.
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
If you’re new to horns or horn kits, our First-Time Buyer’s Guide is a great place to learn what to expect, how to install your kit, and how to choose the right setup. Our Install Gallery is also a great resource for getting inspiration for your application.
This kit is great, i was on the fence for a while about getting a kit. I didnt want to sacrifice my spare tire. This kit is loud and easy to mount with only two horns. I ended up mounting the compressor in the bed and the horns on the frame facing straight down. I used some aluminum L channel i had to make a bracket. The audio clip doesn't do this kit justice, id definitely say its louder. It may not be a "train horn" but its very close. The price of this kit I would highly recommend it. Installation was on 2020 f250.
Super satisfied with the horn loudness and sound; highly recommended to make sure people hear you are there !!!
Got this rocker installed on my jeep jk and love it! Super loud and easy to install.
I love that everything was separate and by itself because it worked perfectly on my 2012 Prius! I stuffed the tank and compressor in the trunk and then mounted the two horns in the rear bumper. Now I can tell these big truck a**holes to GET OUT OF MY WAY!! HONK!! HONK!!
Hi I just wanted to thank you greatly. I completed the install and everything went well. Struggled a little installing horns in front due to continuous modifications to brackets due to limited space on 2012 Honda Pilot. More of a miscalculation on bracket size . Once front end was out there was a lot of room. But as far as the electrical , everything went well thanks to constant communication with customer service . I wired it so that I can turn on compressor at will along with the separate momentary push button switch to fire these babies. Just don’t forget to turn off switch when not using. This thing is amazing sounding and I am very happy with it, and I’ve also already filled tires since I installed a quick disconnect in-line. Also used for my pneumatic nailer on moulding . Does catch attention to people driving on phones lol. Extremely and A + customer service. You are awesome.