Introducing the HornBlasters 145 PSI 2-Gallon Air Source Unit - the ultimate hassle-free solution for powering your HornBlasters horns! Say goodbye to lengthy installations and embrace the convenience of a streamlined, easy-to-install air source unit tailored to your needs.
Our 145 PSI 2-Gallon Air Source Unit is specifically optimized for HornBlasters horns, offering one of the most efficient and budget-friendly ways to supply your horns with a steady stream of air. Unleash the full potential of your horns and let them roar with pride!
Featuring the robust Viair 280C Air Compressor mounted directly on the tank, this compact powerhouse boasts a 30% duty cycle and an astoundingly swift recharge time. In just over a minute, watch it fill the tank from 110 to 145 PSI! Our 2-gallon tank ensures up to 5 seconds of exhilarating blast time with most HornBlasters air horns and even some train horns.
Designed with beginners in mind, the HornBlasters 145 PSI 2-Gallon Air Source Unit arrives pre-wired and pre-plumbed for your convenience. Installation is a breeze - simply connect the pressure switch to fused power, establish a solid ground, and attach an air line to the compression fitting. That's it! Your horn-enhancing journey can begin in no time.
Don't let a complicated onboard air system hold you back from experiencing the thrill of HornBlasters horns on your ride. Choose the HornBlasters 145 PSI 2-Gallon Air Source Unit and upgrade your horn game today!
Pre-Installed Pressure Switch1/4" NPT 175 PSI Safety Blow-Off1/4" Drain Cock1/2" NPT Compression FittingInsulated Wiring with ConnectorsInstallation Instructions
(Note: Tank mounted air compressors are not fully sealed. For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc...)
(Our Open-Box Products may have a few cosmetic defects but otherwise, they're in like-new working condition and carry the same 1-Year Manufacturer’s Defect Warranty that all of our products carry.)
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 1.59 | 10 | 0 | 45.0 | 10 |
| 10 | 1.49 | 12 | 1.0 | 40.2 | 13 |
| 20 | 1.33 | 13 | 2.0 | 32.1 | 14 |
| 30 | 1.11 | 14 | 3.0 | 29.0 | 15 |
| 40 | 1.04 | 15 | 4.0 | 26.4 | 16 |
| 50 | 0.99 | 15 | 5.0 | 24.2 | 16 |
| 60 | 0.92 | 16 | 6.0 | 22.0 | 17 |
| 70 | 0.87 | 16 | 7.0 | 21.0 | 19 |
| 80 | 0.81 | 17 | 8.0 | 19.4 | 18 |
| 90 | 0.76 | 17 | 9.0 | 17.5 | 17 |
| 100 | 0.74 | 19 | 10.0 | 15.3 | 17 |
| 110 | 0.71 | 19 | |||
| 120 | 0.67 | 18 | |||
| 130 | 0.62 | 17 | |||
| 140 | 0.57 | 17 | |||
| 150 | 0.51 | 17 |
* Supply Voltage: 13.8 Volts
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 145 PSI | 3 min. 40 sec.(± 10 sec.) |
| 110 to 145 PSI | 1 min. 15 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
Warnings & Notices
Warning
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
First Time Buyer's
If you’re new to horns or horn kits, our First-Time Buyer’s Guide is a great place to learn what to expect, how to install your kit, and how to choose the right setup. Our Install Gallery is also a great resource for getting inspiration for your application.
You may also like